Site Information

MAIN MENU

shop by Category

CONNECT WITH US

 Loading... Please wait...
844-802-4499
  • Image 1

VBx-1 Electronic Vibrator

$25.00
SKU:
757565519798
Shipping:
Calculated at checkout
Quantity:

Product Description

The VBx-1 Electronic Vibrator by Aurora Design is a reliable, flexible solution when looking to replace the vibrator in an antique car.
 
There are a number of features that make the VBx-1 almost impervious to damage. It's protected from forms of electrical damage that come from a battery reversal, shorted output, and just too much power. Because fear of a surge or a short isn't an issue here, the VBx-1 can be hardwired without fear of an electrical issue. This is thanks to a series of complex algorithms that also govern other unique functions like delayed start and restart. All of these protective features are executed with an impressive level of accuracy by the microprocessor which means that
 
It doesn't just protect itself, either. Any antique car owner knows that replacing parts can be an ordeal, especially for the rarer ones. The VBx-1 will sense something wrong and protect itself and the transformer in the case of something like a buffer capacitor short. It can also protect other pricey parts like the rectifier and the filters. The durability leads to the flexibility. Because of the ability to hard-wire it, connect it to an original vibrator base, or put it in the shell of an old vibrator, the VBx-1 is a viable alternative to seeking out harder to find models such as 5, 6, and 7 pin vibrators.
 
The VBx-1 only requires a single board for all positive ground installations and the same is true of negative ground installations. This makes it simple to install and maintain. The design of the part conforms to SAE specifications and is manufactured in the United States. To put it simply, the VBx-1 is a great Electronic Vibrator that's not only built to last but also makes sure other radio parts last as well. In ways, that makes it more than just a replacement.

The VBx-1 electronic vibrator represents a whole new paradigm in vibrator replacements. Microprocessor controlled for the highest accuracy and features available, nothing else even comes close! Full protection against reverse battery, shorted outputs and over power, the VBx-1 is nearly indestructible. Because of this ruggedness, the VBx-1 can be hard wired into the circuit like any other robust component such as resistors and capacitors. It can also be wired to an original style vibrator base for plug-ability, or even placed inside the can of an original vibrator! With this flexibility, hard to find 5, 6 and 7 pin vibrators are no longer an issue. Operating from 3.0 - 18V (12-38V for VBF-1), only one board is required for all positive ground installations and one for all negative ground installations.

Through the use of sophisticated algorithms, the microprocessor allows the VBx-1 to offer such unheard of features as deadband control, delayed start, soft start, delayed restart, short circuit protection and over power protection, all with astounding accuracy. The deadband control, delayed start and soft start features in particular greatly reduce the stresses on the transformer and rectifier extending their lives. Not only does the VBx-1 protect itself, but it also protects expensive parts in the radio like the transformer, rectifier and filters. Unlike simple “dumb” electronic vibrators that will burn a transformer up if something as simple as the buffer capacitor shorts, the VBx-1 immediately senses this condition protecting itself and the transformer until the buffer capacitor can be replaced! No longer can a careless user destroy expensive parts in their radio simply by leaving it turned on after a failure. As with all Aurora Design products, the VBx-1 is designed to SAE specifications and built in the USA at an ISO9001:2000 facility.

Find Similar Products by Category