Revolution Electronics Dome Light Dimmer (For Most Older Cars)
Soften the interior lighting of your Classic Car. This dome light dimmer keeps the dome light on an extra two and a half seconds then slowly fades off, instead of simply switching off. This device is easily installed and can be mounted in any location where electrical connections are easily accessible.
Simple installation: two wires attach to the two wires running up to the dome light and one more wire for ground.
This is for vehicles where the door switch supplies a ground connection, (most older cars, FoMoCo from 50's, 60's, 70's, and 80's))
Two styles are available, depending on how the dome light is activated. 13001 is for vehicles where the door switch supplies a ground connection (most older cars including GMs from the ‘60s). Part number 13003 is for vehicles where the door switch supplies a 12v connection (many newer cars with remote entry and ‘60s era Mustangs). If you are not sure which one you need, use a voltmeter to test the voltage on the dome light when the dome light is off. If the voltmeter shows battery voltage, then the door switch supplies the ground connection (so you need pn 13001). If, instead, the voltmeter shows 0V, the door switch supplies the 12v connection (so you need pn 13003).
2”x1.5”x1” plastic enclosure with mounting tabs.
Internal 7.5A resettable fuse
24 inch, 18 gauge leads
Made in USA
Parts Included in this Kit
1-Small crimp ring
2-Male 1⁄4” Connectors