Revolution Electronics Dome Light Dimmer (For Most Older Cars)
Soften the interior lighting of your Classic Car. This dome light dimmer keeps the dome light on an extra two and a half seconds then slowly fades off, instead of simply switching off. This device is easily installed and can be mounted in any location where electrical connections are easily accessible.
Simple three wire installation.
This is for vehicles where the door switch supplies a 12v connection, (FoMoCo from 50's, 60's, 70's, and 80's))
If you are not sure which model you need (either 13001 or 13003), use a voltmeter to test the voltage on the dome light when the dome light is off. If the voltmeter shows battery voltage, then the door switch supplies the ground connection (so you need pn 13001). If, instead, the voltmeter shows 0V, the door switch supplies the 12v connection (so you need pn 13003).
2"x1.5"x1" plastic enclosure with mounting tabs.
Internal 7.5A resettable fuse
24 inch, 18 gauge leads
Made in USA
Parts Included in this Kit
1-Small crimp ring
2-Male 1⁄4" Connectors