Product Description
This listing is for the RetroSound Hide-Away Antennas. Authorized RetroSound / RetroBelt dealer. Choose options that match your vehicle and features.
Features
- Authorized product for classic car and truck applications
- Sold through an authorized dealer
Vehicle Fit
This page targets Hide-Away Antennas. Compare your year, make, model, and opening to the title before ordering. Call 844-802-4499 if you are unsure.
Before You Install
Test-fit before cutting or drilling. Confirm wiring, mounting, and clearances. Vintage Car Radio does not offer installation.
About This Product
For help with RetroSound Hide-Away Antennas, call 844-802-4499 or 574-226-6676.
Hide-Away Antennas specifications
- RetroSound Enhanced Amplified Hide-away antenna (WPA2) The RetroSound® WPA2 enhanced amplified hide-away antenna is a great solution for anyone who doesn't want to install a standard fender-mount antenna.
- The WPA2 installs in seconds using a standard antenna plug and your radio's power antenna wire.
- This antenna uses magnetic field circuitry for enhanced radio reception.
- It can be installed almost anywhere thanks to the supplied 105-inch antenna lead and power wire.
- RetroSound Amplified Hide-away antenna (HPA1) RetroSound® hideaway antennas are an excellent solution for any classic car without a fender-mounted antenna.
- The HPA1's small size is ideal for mounting behind the dash, in a glove box, or any other discrete location and provides a decent amount of reception on AM and FM radio bands thanks to its magnetic field circuitry.
- Limited warranty for Speakers/Accessories: 1 year (Retro Manufacturing chart), unless the product page states otherwise
Source: Retro Manufacturing product page. If the sheet in the box differs, follow the sheet that ships with the product.
Hide-Away Antennas wiring and tech tips
- Disconnect the battery before antenna power or lead work.
- Route the antenna cable away from ignition wires to reduce noise.
- Power antennas: connect power/ground per the Retro Manufacturing instructions for this SKU.
- Confirm the mount style (side-mount, fender, pillar, etc.) matches your vehicle years in the title.
- After install, check AM/FM reception and that power masts extend/retract fully if equipped.
Vintage Car Radio does not offer installation.
Hide-Away Antennas manuals
- Manufacturer product page (specs & any linked manuals)
- Retro Manufacturing warranty
- Retro Manufacturing help center
When Retro Manufacturing publishes a PDF on the product page (speakers manual, amp manual, antenna sheet, etc.), use that document for the official diagram.
One-Year Retro Manufacturing Warranty
Per Retro Manufacturing’s limited warranty, Speakers and Accessories (including many antennas, amps, and related parts sold under those charts) are covered for 1 year from the original purchase date for defects in materials and workmanship when purchased from Retro Manufacturing or an authorized dealer.
RA required — tech@retromanufacturing.com or 1-888-325-1555, or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
FAQ — Hide-Away Antennas
Is this a radio head unit?
No — this listing is a RetroSound antenna. Motor 1B/2B/4HD options apply only to RetroSound radios.
Where are the official specs?
See Specs (from Retro Manufacturing’s product page) and the manufacturer link under Manuals.
Do you install?
No. DIY or a shop you choose.
Warranty?
Typically 1-year Speakers/Accessories coverage from Retro Manufacturing — see Warranty.
Need help?
844-802-4499 or 574-226-6676.
Specs
Wiring / Tech Tips
Manuals
Warranty
One-Year Retro Manufacturing Warranty
Per Retro Manufacturing’s limited warranty, Speakers/Accessories such as HPA1 are typically covered for 1 year when purchased from Retro Manufacturing or an authorized dealer.
RA: tech@retromanufacturing.com / 1-888-325-1555, or Vintage Car Radio 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
