Seatbelts for Classic Cars - Page 1

Shop by Category

Shop by Brand

Seatbelts for Classic Cars

Everybody wears seatbelts now, if you don’t you’ll get busted. It’s hard to imagine a time when you didn’t have to wear seatbelts. Well guess what, before 1965 the big car companies like Ford, Chevy, BMW, etc. we’re not required to have seatbelts, they were optional. Everyone grew up sliding back and forth in the back seat of Mom and Dad’s station wagon, it was the norm. Obviously seatbelts work. They’ve saved millions of lives and no one would drive without them but what about all those classic cars and trucks that are still on the road today? You go to Vintage Car Radio and retro fit your ride with modern seatbelts!
Vintage Car Radio carries exact fit seatbelts for Camaros, Firebirds, Mustangs, Corvettes and many others. Vintage Car Radio also carries kits that you can easily retro fit your VW, Mopar, Porsche, Oldsmobile with modern, reliable seatbelts. No more sliding around on your seat and also you have the peace of mind that comes with driving with seatbelts. Not only is your life more protected, also other drivers lives are because you can control your vehicle better.
All seatbelts sold by Vintage Car Radio are brand new to replace your old belts, because like any other part on your car or truck, age and deteriorate. You don’t want to find out that your seatbelts were too old when you get into a wreck and at best get minor injuries. Now is the time to upgrade and be safe.
Vintage Car Radio carries retro fit seatbelts for the C2 and C3 Corvettes, which covers 1968-82 years. The belts come in the original look and are easy to install. All these are just like the originals but are new and are of a better quality.
Vintage Car Radio carries retro fit seatbelts for 1974-81 Camaro, Nova and Firebird and also 1978-92 Camaro and Firebird, front and rear. The belts come in the original look and are easy to install. All these are just like the originals but are new and are of a better quality.
Vintage Car Radio carries retro fit seatbelts for 1978-88 El Camino. The belts come in the original look and are easy to install. All these are just like the originals but are new and are of a better quality.
Vintage Car Radio carries retro fit seatbelts for Mopars 1964-67. The belts come in the original look and are easy to install. All these are just like the originals but are new and are of a better quality.
Vintage Car Radio carries retro fit seatbelts for Mustangs 1978-93. The belts come in the original look and are easy to install. All these are just like the originals but are new and are of a better quality.

Muscle cars and hot rods are meant to be driven fast and in anger. There’s nothing like stomping on the go pedal of your big block Camaro, old 911 or Cobra Mustang, tearing down the drag strip or road course, sliding sideways and having way too much fun. But what happens if you push it too far? Forget about the damage to your car, steel can be replaced but you can’t. It’s probably time for a five point racing harness. Vintage Car Radio sells exactly what you need to keep you safe. Not only will you be more likely to survive a crash, you’ll also be able to drive better. If you don’t have a good seatbelt or racing harness, you’ll be moving all over your seat because of the g’s pulled when accelerating, decelerating or cornering. If you stay in one spot securely you can steer better, brake better and be in control better with a five point harness from Vintage Car Radio.
Vintage Car Radio has the original seat belt style, the lap belt for most major manufactures. The lap belt is just that, it goes right across your lap. It’s the minimum safety requirement for your old hot rod or classic. It’s easy to install, only minor drilling required to mount the belts.
Everyone knows that the older you get, sometimes you get bigger in the midsection and then the seatbelt gets a little tight. So what do you do? You get a seatbelt extender! The 12-inch belt extender allows you to extend the male belt end of your seat belt system by 12 inches. Another words, more room for your big belly. You get one 12-inch extension in black webbing, and 1/2" bolt (Grade 5), 1/2" nut (Grade 5) and a lock washer. Now you can breathe again. 
When you bolt in your new belts, you don’t want to use some cheap bolts. This is your life on the line, so you can go to Vintage Car Radio for one of their Advanced or Basic shoulder belt bolt kit. Comes with everything you need to mount your belts with quality hardware. Don’t cheap out on this part!
Just about everyone wants a Tri-five Chevy (55-57). They are thee classic car, well they didn’t come with seatbelts either so you need got a kit from Vintage Car Radio. Their two passenger seat belt kits for Chevrolet vehicles include everything you will need to add a retractable lap and shoulder belt system to your Tri-Five Chevy car. Safety first folks! Kits are available in ten colors (all the good factory colors!) with color-matched stitching and retractors. Grade 5 mounting hardware and a detailed installation manual are included. Advanced inertia retractors are included, which lock both top and bottom sections upon a sudden stop. Adding belts to your classic Chevy is an invaluable investment in your vehicle and in your family’s safety. Please note that advanced fabrication skills may be needed to install anchor points; please consult a professional installation specialist if needed.

● Meet or exceed federal motor vehicle safety standards
● Grade 5 hardness mounting hardware included
● Ten colors with color-matched retractors and stitching
● Classic chrome aviation-style lift buckle and chrome belt ends
● Advanced inertia reel system works in both horizontal and vertical positions
● Detailed installation manual included

Quick view

sku: 4536453

1987-1993 Dodge Dakota, Standard Cab, Driver, Passenger & Center, Bench Seat Belt Kit

$263.95

Choose Options Compare