Product Description
Transform the Old
Classic cars like the 1949-50 Fords come from a vintage era, and they can use some modern magic to improve their sound. Old radios served their purpose but are no match for today's technology.
You can change all that and transform your 1949-50 Ford with one of today's top radios, the Custom Autosound USA-230.
The New Upgrades the Old
Technology has made radios better than anything older cars have seen, and older cars can enjoy that magic too. Here are the upgrades that help old Fords get better audio.
First, 200 watts give the USA-230 its power. Second, a power antenna lead helps the electronic tuner pull in signals.
The tuner keeps your 16 presets (12 FM, 4 AM) as clear as possible, with little static or interference.
Third, a 1/8-inch aux jack, 4-way fader and 4-channel RCA pre-outs help you get the best sound. Finally, a built-in digital clock reminds you that time waits for no one.
The Magic of the USA-230
It isn't just the features that make the USA-230 magic for classics like the 1949-50 Fords. It's also how easily it installs in your old Ford. Nothing beats that.
This radio features:
● AM/FM stereo
● 200 Watts (4x50)
● Auxiliary Input (RCA Rear) RCA to 1/8" pin jack included
● Digital Clock
● Electronic Tuner
● 16 presets (12 FM, 4 AM)
● 4 Channel RCA Pre-outs
● 4-way fader
● Power Antenna Lead
Available with a black or chrome face
Frequently Asked Questions About the 1949-50 All Fords USA-230 In Dash AM/FM
Is this radio made specifically for the 1949-50 All Fords?
This listing is the version made for the 1949-50 All Fords, designed to go into the original dash opening. Custom Autosound says its radios fit without altering or cutting the original dash.
What if my 1949-50 All Fords has air conditioning?
The Factory Air option tells us which dash layout your 1949-50 All Fords has, so pick Yes if it has factory A/C.
Will it work with a 6-volt system?
How does the USA-230 handle phone audio and connections?
There's a rear RCA auxiliary input, and Custom Autosound includes an RCA to 1/8" pin jack cable for phones, MP3 players or satellite tuners. The electronic tuner stores 16 presets, 12 FM and 4 AM.
Which add-ons are offered with this radio?
Add-ons offered here are a front dual voice coil speaker, a rear 6x9 speaker pair (Custom Autosound 6x9 Speaker Pair and Upgraded Pioneer Speaker Pair), kick panels (W/Speakers, W/O Speakers, and Pioneer Upgrade), and a hideaway antenna.
What else should I know about the USA-230?
It's rated at 200 watts (4x50) and has 4-channel RCA pre-outs, so you can add an outboard amplifier later. It skips the USB port, iPod dock and CD changer control found on the USA-630, but keeps the same look.
USA-230 specifications
- 200 watts peak power (50W x 4)
- AM/FM stereo tuner
- RCA auxiliary input
- 12 FM and 4 AM presets
- Electronic tuning and volume
- 4-channel RCA pre-outs for an external amplifier
- Separate bass and treble controls
- 4-way fader and left/right balance
- Power antenna lead
- Designed for original classic dash openings (no DIN cut required for vehicle-specific faceplates)
- Custom Autosound 2-year manufacturer warranty
USA-230 wiring and tech tips
Use this as a head-unit reference for power, ground, antenna, speakers, and amplifier connections. Always match the printed diagram that ships with your unit if it differs.
Power and ground (typical Custom Autosound harness)
| Function | Wire color |
|---|---|
| Ignition / ACC +12V | Red |
| Battery / constant +12V | Yellow |
| Ground | Black |
| Power antenna | Blue |
Ignition and power-antenna leads are commonly fused at 1A on the harness—confirm against the guide that ships with your radio.
Speaker wiring (typical)
| Speaker | Wire color |
|---|---|
| Left front + / − | White / White-Black |
| Right front + / − | Gray / Gray-Black |
| Left rear + / − | Green / Green-Black |
| Right rear + / − | Violet (or Purple) / Violet-Black |
USA-230 extras
Use the rear RCA AUX for a wired player. Pre-outs support adding an amplifier later without replacing the radio.
Suggested order for a 1949-1950 Ford
- Disconnect the vehicle battery before any wiring.
- Connect ground first, then constant (yellow) and ignition (red).
- Connect the antenna plug and the blue power-antenna lead if your car has a power antenna.
- Wire all four speakers, matching polarity.
- If using an amplifier, run RCA cables from the front/rear (and sub on USA-740/USA-850) pre-outs.
- Reconnect the battery and test radio, speakers, and charging system voltage.
Tech tips for 1949-1950 Ford
- This radio is sold for the factory Ford opening used in 1949-1950 models—do not cut a modern DIN rectangle if you want a stock look.
- A poor ground is the most common cause of whine or weak audio; scrape paint at the ground point and use a star washer.
- If AM reception is weak, check the antenna mast, cable continuity, and that the antenna plug is fully seated.
- Vintage Car Radio does not install radios. If you are not comfortable with 12V wiring, use a qualified installer.
USA-230 manuals
Download the manufacturer guide for operation, safety, and the official wiring diagram. You can also browse our full library on the Manuals page.
Vintage Car Radio does not offer installation. The manuals are for do-it-yourself reference or to share with your installer.
Two-Year Custom Autosound Warranty
All Custom Autosound radios sold by Vintage Car Radio are backed by a 2-year manufacturer warranty from Custom Autosound.
Radios are checked before shipping. If something is wrong out of the box or under warranty, call us at 844-802-4499 or 574-226-6676 and we will help coordinate with the manufacturer.
Vintage Car Radio does not offer installation services. Refer to the Manuals and Wiring / Tech Tips sections for manufacturer guidance, or use a qualified car-audio installer.
FAQ — 1949-1950 Ford USA-230
Will this fit my 1949-1950 Ford without cutting the dash?
It is built for the original radio opening used on 1949-1950 Ford models. Compare your dash opening and bezel to the product photos. We do not modify dashes in-house.
Does this radio have Bluetooth?
The USA-230 has no Bluetooth and cannot be upgraded to Bluetooth. It is not compatible with Bluetooth adapters or add-on kits. If you want Bluetooth, choose the USA-630 or the USA-740.
Do I need an amplifier?
Many owners run speakers directly from the radio. Pre-outs are there if you want more volume or a subwoofer later.
Do you install the radio?
No. Vintage Car Radio ships the unit and documentation; installation is DIY or by a shop you choose.
What is the warranty?
Custom Autosound radios include a 2-year manufacturer warranty. See the Warranty section for details.
Need help?
Call 844-802-4499 or 574-226-6676.
Specs
Wiring / Tech Tips
Manuals
Warranty
Two-Year Custom Autosound Warranty
All Custom Autosound radios sold by Vintage Car Radio are backed by a 2-year manufacturer warranty from Custom Autosound.
Radios are checked before shipping. If something is wrong out of the box or under warranty, call us at 844-802-4499 or 574-226-6676 and we will help coordinate with the manufacturer.
Vintage Car Radio does not offer installation services. Refer to the Manuals and Wiring / Tech Tips sections for manufacturer guidance, or use a qualified car-audio installer.
