Product Description
The 1955 Ford had a handsome dash with a round-faced radio at its center. This 1955 Ford DeLuxe Radio AM/FM/Bluetooth from Antique Automobile Radio looks, feels, installs and operates like the original, while adding FM stereo, Bluetooth and enough power for modern speakers.
Looks and Works Like the Original
The outer knob is on/off/volume, the inner knob is tuning and the horizontal knob is tone, just as on the factory radio. When the radio is on, the dial pointer, knobs and pushbuttons move and work like the original. The AM scale on the dial glass is an exact copy of the original, with a smaller FM scale hidden in the background. To switch between AM and FM, turn the radio off and quickly back on. There is no digital display to spoil the look.
Features
- Fits the original 1955 Ford Mainline, Customline, Fairlane and station wagon dash with no modifications
- Case only 2.5 inches deep behind the dash, leaving room for electric wipers and air conditioning
- Digitally tuned AM/FM stereo receiver behind the original-style analog display
- Bluetooth 5.0 for streaming and hands-free calls, with a built-in microphone
- 3.5mm auxiliary input for an MP3 player, CD player or XM receiver
- 180 watts RMS (45 watts x 4 channels)
- Four RCA outputs plus a subwoofer output for an external amplifier
- North American or European channel spacing
- Correct chrome-plated pushbuttons, knobs and backrings, and a chrome die-cast dash plate
Build the System
- Front dual voice coil speaker, which plays both stereo channels through a single dash speaker
- Rear 6x9 speaker pair, Custom Autosound or upgraded Pioneer
- Antenna: hideaway antenna or power antenna
Speaker Notes
Antique Automobile Radio warns not to use original, grounded speakers: the radio has a protective circuit that shuts down if a speaker wire is grounded or faulty. It recommends 4-ohm speakers rated at 40 watts RMS or more. The dual voice coil dash speaker offered here gives stereo from the single original speaker location.
Electrical Requirements
The radio runs on 11.5 to 16 volts DC, negative ground only. Antique Automobile Radio offers power inverters for 6-volt positive ground vehicles. Check your car's system before installing.
Installation
A 12-wire harness with plug-in connectors includes power, ground, a 12-volt output for a power antenna or amplifier, four speaker connections and dial lights. The radio uses the original mounting, so installation is straightforward for most owners.
Why a Reproduction
An original 1955 Ford radio is AM only and often needs major repair. A reproduction keeps the face and feel while giving you FM stereo, Bluetooth and dependable reception, and you can keep the original radio safe.
1955 Ford DeLuxe AM/FM/Bluetooth Radio FAQ
Does it fit without cutting the dash?
Yes. It fits the original 1955 Ford dash with no modifications.
How do I switch between AM and FM?
Turn the radio off and quickly back on.
Does it have a digital display?
No. It keeps the original-style analog dial.
Can I use my original speakers?
No. Use 4-ohm speakers that are not grounded.
Can I take phone calls?
Yes. Bluetooth supports hands-free calling with a built-in microphone.
Antique Automobile Radio specifications
- Antique Automobile Radio factory-fit reproduction radio (Made in USA manufacturer)
- Preserves original face, knobs, and pushbutton look while adding modern electronics
- AM/FM tuner with Bluetooth (wireless voice and audio — Bluetooth 3.0 + EDR per manufacturer pairing guide)
- Auxiliary input on the rear of the radio; Bluetooth has priority when active
- Designed to fit the original dash opening without cutting metal (vehicle application per listing)
- Designed to work with the original antenna on many applications
- Use modern 4-ohm speakers — do not use original grounded speakers (they will not handle the power/frequency range)
- 12 V negative-ground vehicle electrical systems (use a booster/inverter for other systems when required)
Wiring / tech tips — 1955 Ford DeLuxe Radio
From Antique Automobile Radio installation guidance (model manuals):
- Be safe — disconnect one battery terminal until installation is complete.
- Do not operate the radio directly from a battery charger.
- Never use a fuse rated for more than 10 amps.
- Use only 4-ohm speakers; never allow any speaker lead to become grounded when the radio is on.
- Locate antenna jack, AUX input, and line outputs before mounting; bench-test with a charged battery when practical.
Bluetooth pairing: put the radio in Auxiliary mode and follow Antique Automobile Radio pairing instructions (device name appears like AARInc.BT…).
Vintage Car Radio does not offer installation.
Manuals
Use the model PDF packed with your radio when provided. Published sheets we can link:
Manufacturer support: support@radiosforoldcars.com · 800-933-4926 · 727-785-8733.
Warranty
Antique Automobile Radio manufactures these units in the USA. For warranty or service questions, contact support@radiosforoldcars.com or 800-933-4926, or Vintage Car Radio at 844-802-4499 / 574-226-6676 with your order number.
Vintage Car Radio does not offer installation.
FAQ — 1955 Ford DeLuxe Radio
Will this fit without cutting the dash?
Antique Automobile Radio designs these to fit the original opening for the titled application (1955 Ford DeLuxe Radio). Compare your dash to the photos.
How do I pair Bluetooth?
See the manufacturer pairing page linked under Manuals. The radio remembers recently paired devices.
Can I keep original speakers?
No — use modern 4-ohm speakers; original grounded speakers are not suitable.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Antique Automobile Radio support@radiosforoldcars.com.
Specs
Wiring / Tech Tips
Manuals
Warranty
Warranty
Antique Automobile Radio manufactures these units in the USA. For warranty or service questions, contact support@radiosforoldcars.com or 800-933-4926, or Vintage Car Radio at 844-802-4499 / 574-226-6676 with your order number.
Vintage Car Radio does not offer installation.
