Product Description
1965-1968 Porsche 911, Driver & Passenger Seat Belt Kit
- Both front seats
- Retractable three-point belts
- Lift latch buckles, chrome or black wrinkle
- Hardware included
- FMVSS 209 and 302 rated
For short-wheelbase 911 owners who want both seats done at once, Seatbelt Planet sells this two-belt kit for 1965-1968 cars. Each seat receives a retractable lap and shoulder belt with a lift latch buckle, and the hardware comes with the kit. Both belts share one dye lot and match side to side in a cockpit where every detail is on display.
Fitment
Listed for the driver and passenger seats of 1965-1968 Porsche 911 models.
Webbing Colors
There are 52 webbing colors, 13 premium. For the pair you pick one lift latch finish, chrome or black wrinkle.
Why Replace?
Original belts from the sixties are well past their service life, and many early 911s have had mismatched replacements over the years. A matched kit brings both seats back to one standard.
Belt Care
Keep the lift latches clear of the door sills, wash the straps gently with mild soap, and let the reels retract slowly.
About the 1965-1968 Porsche 911
The early 911 combined a compact body, a light flat-six and a four-seat layout that made it practical as well as fast. Porsche built the 911 alongside the four-cylinder 912 in these years.
Before You Install
Inspect both floor anchors and both pillar mounts, and clean all threads before the kit arrives.
Good to Know
Two belts per kit.
Choosing the black wrinkle lift latch gives the cabin a quiet, factory-style look, while chrome adds a little sparkle against black or tan upholstery.
Short-wheelbase 911 values have climbed sharply, and owners often want every interior part to match period photographs.
Reels pull both shoulder straps clear when a front seatback tips forward to let someone in the back.
The kit is a convenient way to replace both belts in one step, without hunting for a second belt in the same dye lot later.
If seats or pillars on your 911 have been repaired, phone 574-226-6676 to talk through the mounting points.
Early 911 coupes had small rear seats, so the front seatbacks tilt forward often. Shoulder straps that wind back onto their reels stay out of the way when someone climbs into the back.
Whether your car wears Irish Green, Polo Red or Slate Grey paint, the long list of webbing shades makes it simple to pick a belt that looks deliberate rather than an afterthought.
Both buckles in this kit are lift latch style, and you choose one finish for the pair, so the driver and passenger sides look identical when the doors are open.
Short-wheelbase cars are the purest form of the early 911, and owners of these coupes and Targas tend to sweat the details that make the cabin feel original.
Kits like this one help a short-wheelbase 911 look correct when the doors open at a show.
Frequently Asked Questions
Is this a pair?
Yes, driver and passenger.
Which buckle finish?
Chrome or black wrinkle lift latch.
Do the belts retract?
Yes.
Hardware?
Included.
Which years?
1965-1968 Porsche 911.
Single belt?
Listed separately.
Questions about fit?
Call 574-226-6676.
1965-1968 Porsche 911, Driver & Passenger Seat Belt Kit specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1965-1968 Porsche 911, Driver & Passenger
- Kit listing — see overview for which seating positions / belt count are included
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1965-1968 Porsche 911, Driver & Passenger Seat Belt Kit
- Confirm this listing matches your vehicle (1965-1968 Porsche 911, Driver & Passenger), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1965-1968 Porsche 911, Driver & Passenger Seat Belt Kit manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1965-1968 Porsche 911, Driver & Passenger Seat Belt Kit
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1965-1968 Porsche 911, Driver & Passenger?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
