Product Description
1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket Seat Belt Kit
- Convertible front seats
- Two-point retractable lap belts
- All-metal push button buckles
- Bench or bucket
- FMVSS 209 and 302 rated
For open-top Impalas, Seatbelt Planet packages a pair of reel-equipped front lap belts that suit either bench or bucket seating; full-metal push button fasteners and bolts are part of it.
Fitment Notes
Listed for 1967-1973 Chevrolet Impala convertibles, driver and passenger. Compare the listing with your car, since full-size convertible offerings changed during these years.
Available Colors
Fifty-two colors are available, thirteen premium.
Why New Belts Matter
Convertible belts fade and weaken quickly in direct sun. New retractable lap belts restore the front seats to proper working order without adding hardware to the open cabin.
Keeping Them Like New
Use a cover or raise the top when parked, and wipe the belts dry after rain.
About the Chevrolet Impala
Impala convertibles are some of the most desirable full-size Chevrolets of the era, and their open cockpits show off every interior detail.
Before You Install
Inspect the floor anchors beside each seat and look for rust from water entering with the top down.
Good to Know
Rear belts are separate listings.
Open cars show off their belts, so color matters.
Lap belts keep the open cabin clean.
Bench or bucket fitment makes the kit flexible.
Seatbelt Planet says this kit suits bench or bucket seats, so it works with either front seat style.
With the top down, everyone sees the belts, so a color that matches the upholstery looks best.
Retractors keep the straps from flapping or lying on the floor.
Rear lap belts for these years are listed separately.
Many Impala convertibles have been restored with new tops and seat covers, and the belts are often the last original item left. Replacing them completes the job.
Before installation, check the floor around each anchor. Convertible floors can rust from water entering with the top down or through a leaking top.
A convertible's open cabin means the belt buckles often sit in direct sun. All-metal buckles hold up to that heat better than plastic-covered ones, although they can get warm to the touch on summer afternoons.
Many owners choose to keep a towel over the buckles when parked with the top down.
Fitment spans the 1967 through 1973 model years.
Owners of Impala convertibles often drive them on weekend cruises and to car shows, so the belts get regular use. A fresh pair makes buckling up easy and gives the open cabin a well-kept look.
Before ordering, look at the seat frame under each bucket and note where the original anchor bolts thread in, since convertibles from this era sometimes had floor patches welded in during rust repair.
Frequently Asked Questions
Fits bench seats?
Yes, bench or bucket.
Pair?
Yes.
Shoulder belts?
No.
Hardware?
Included.
Years listed?
1967-1973.
Will the top interfere with the belts?
No, these are floor-mounted lap belts with no shoulder anchor near the top.
Do I need rear belts too?
Rear lap belts are a separate purchase.
Questions about fit?
Call 574-226-6676.
1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket Seat Belt … specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket
- Kit listing — see overview for which seating positions / belt count are included
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket Seat Belt …
- Confirm this listing matches your vehicle (1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket Seat Belt … manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket Seat Belt …
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1967-1973 Chevrolet Impala, Convertible, Driver & Passenger, Bench or Bucket?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
