Product Description
1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench Seat Belt
- One outboard bench position
- Retractable three-point belt
- Plastic push button buckle
- Hardware included
Sometimes only one belt in a D150 has failed, usually the driver side after years of daily climbing in and out. Seatbelt Planet sells this single three-point belt for either outboard bench seat of 1978-1993 standard cab trucks, so you can replace just the side that needs it.
Fit Details
Fits one outboard seat, driver or passenger, on the front bench of a 1978-1993 Dodge D150 standard cab.
Color Choices
Webbing is offered in 52 colors, with an upcharge for specialty shades. Match the color to the belt you are keeping on the other side.
Time for New Belts?
A driver belt that will not retract hangs in the door jamb, gets slammed in the door and frays further. Replacing it before it fails completely keeps the cab tidy and the belt usable.
Caring for Your Belts
A quick wipe with a mild soap solution keeps the strap clean; let it air dry pulled out of the reel.
About the D150 Single Bench Belt
The D150 shared its cab with the heavier D250 and D350 trucks, and many were ordered as plain work trucks with vinyl benches and rubber floor mats. Those simple cabs are exactly the ones where the belts get the hardest use.
Pre-Install Checklist
Inspect the anchor bolt holes and the pillar mount for that side, and clean any old thread locker or rust from the threads.
Good to Know
A single belt for the side that needs it.
If both outboard belts are worn, the pair is the better buy because both belts will match exactly.
It also helps on trucks where somebody already swapped in an odd-colored belt on one side of the D150 bench.
The reel keeps the shoulder strap close to the pillar when it is not in use, which helps it last.
Old Dodge work trucks are often still in service, and a working belt is a basic part of keeping them on the road.
Because the listing covers just one side, it suits a truck where the passenger belt still looks fine and only the driver belt has stopped winding in.
Later D150s were often ordered in two-tone paint with a matching interior, so it is worth comparing the color chart against the seat before you order.
If the old belt was cut out by a previous owner, check that the anchor threads have not been damaged before fitting the new one.
The D150 is one of the most common Dodge pickups still on the road, and keeping one in good working order is easier with the right parts.
The D150 single belt ships with its own hardware.
Pick the color of the belt still in the truck.
Frequently Asked Questions
Is this a pair?
No, it is a single belt for one outboard seat.
Which side does it fit?
Either the driver or passenger side of the front bench.
Does it retract?
Yes, it is a three-point belt with a reel.
What is the buckle?
A plastic push button buckle.
Is hardware included?
Yes.
Questions about fit?
Call 574-226-6676.
1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1978-1993 Dodge D150, Standard Cab, Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
