Product Description
1987-91 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench Seat Belt Kit
- Driver, passenger and center
- Retractable outboard belts plus center lap belt
- Metal push-to-release latches
- Hardware included
- FMVSS 209 and 302 rated
Seatbelt Planet's three-belt kit restores every position on the bench up front of a 1987-1991 F-Series standard cab. The driver-side and passenger-side get retractable lap and chest belts, the center rider gets a two-point lap belt without a retractor, and all three use metal push-to-release latches. Hardware is included.
Fitment
Covers all three seats, driver, center and passenger, on the bench up front in 1987-91 Ford F-Series two-door regular cabs.
Webbing Colors
Choose from 52 webbing colors, 13 premium, for all three belts.
Why Replace?
A full set brings the whole bench back to one standard and makes it ready to carry three people again.
Belt Care
Keep the center belt buckled across the seat when unused so it does not slide under the cushion.
About the 1987-1991 F-Series Full Bench Set
Three across the bench was the norm in a work truck, and many of these trucks are still used that way.
Pre-Install Checklist
Lift the bench and inspect the center anchors along with the outboard mounts.
Good to Know
Three belts per kit.
All three belts are made in the same color.
The center lap belt lies flat on the seat.
Hardware is included for every position.
Fit the belts while the bench is out if it is being recovered.
The center lap belt sits between the two outboard buckles, so all three buckles meet near the middle of the bench. Lift the cushion and make sure the center floor is solid before fitting.
Seatbelt Planet describes the outboard belts as retractable lap and chest belts and the center belt as a two-point lap belt without a retractor, all with metal push-to-release latches.
This kit is the most complete option for a standard cab bench truck of these years, and it saves ordering three separate belts.
Many owners use their trucks for hunting trips, farm work or family outings with three across, so a full set of belts gets regular use.
Fresh belts in all three positions also help when it is time to sell.
With three fresh belts the whole bench is covered, which matters for owners who regularly carry three people up front.
Frequently Asked Questions
Three belts?
Yes, two outboard belts and a center lap belt.
Does the center belt retract?
No, it is a two-point lap belt without a retractor.
Hardware?
Included.
Buckle?
All-metal push button.
Cab?
Standard cab bench.
Years?
1987-1991.
Does the center seat get a shoulder belt?
No. The center position gets a two-point lap belt, while both outboard seats get three-point belts with retractors.
Can I buy just the center lap belt?
This listing is the full set of three. If you only need the center belt, ask us about other options for these trucks.
Will this kit suit a SuperCab?
No. Seatbelt Planet sells it for regular cab trucks having a bench up front.
Questions about fit?
Call 574-226-6676.
1987-1991 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench Seat Belt Kit specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1987-1991 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench
- Kit listing — see overview for which seating positions / belt count are included
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1987-1991 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench Seat Belt Kit
- Confirm this listing matches your vehicle (1987-1991 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1987-1991 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench Seat Belt Kit manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1987-1991 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench Seat Belt Kit
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1987-1991 Ford F-Series, Standard Cab, Driver, Passenger & Center, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
