Product Description
1987-1992 Ford Ranger Standard Cab Front Bench Seat Belt
- All metal style buckle
- Standard cab bench seat
- Mounting hardware included
- Lap and shoulder, one rider
- FMVSS 209 and 302 rated
First-generation Rangers with a front bench were the practical choice for work and family duty. This lap and shoulder belt replaces one outboard bench seat belt in a 1987-1992 standard cab Ranger.
Where It Fits
Fitment covers bench-seat regular cab Rangers built 1987-1992, and bolts are in the box. Each belt covers one rider, so buy two for both sides.
Color Options
You can pick among fifty-two webbing shades, a baker's dozen of which cost slightly more. Gray, blue and tan are common Ranger interior colors from these years.
Why Replace Old Belts?
These Rangers are often still in daily service. Thirty-plus years of use wears out retractors and webbing, and slow retraction or frayed edges are common. A new belt restores smooth use.
Care Tips
Avoid letting the belt drag on the floor when getting out. Clean with a damp cloth and mild soap, and keep the retractor clear of grit.
About the Ford Ranger Standard
Ford's Ranger replaced the Courier in 1983 and quickly became a best seller. The 1989 refresh brought a new front end and dashboard, and the truck stayed largely the same through 1992.
Before You Install
Slide the bench forward to reach the floor anchor and look at the B-pillar mount. Swap in the supplied bolts.
Good to Know
A bucket seat version is listed separately for Rangers with a console.
Bench seat Rangers make good first trucks for new drivers, and dependable belts are an important part of that. Replacing both sides at once keeps the cab consistent.
Owners who use their Ranger for hauling should keep cargo away from the belt webbing to avoid nicks and abrasion that could weaken it over time.
Many first-generation Rangers have been handed down through families or bought as inexpensive commuter trucks, so the belts may have seen several owners' worth of wear. Look for fraying near the latch plate and along the edge where the webbing passes through the pillar loop. If you see either, the belt is due.
While the seat is out of the way, it is a good time to vacuum under the bench and check the seat bolts. A clean floor helps you spot rust early, and tight seat bolts keep the bench steady, which keeps the belt geometry right.
Pick the same webbing color for both sides so the seat matches end to end.
Ford refreshed the Ranger front end for 1989, but the belt mounting stayed the same across this span, which is why one listing covers all of these trucks.
Choose matching shades on both sides so the seat reads as one piece when the doors are open.
Rangers are light trucks that get used hard, and a good belt is cheap insurance.
Frequently Asked Questions
Is hardware included?
Yes.
Is it for bucket seats?
No, bench seats.
Is it a pair?
No, one belt.
Which cab?
Standard cab.
Questions about fit?
Call 574-226-6676.
1987-1992 Ford Ranger Standard Cab Front Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1987-1992 Ford Ranger Standard Cab Front Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1987-1992 Ford Ranger Standard Cab Front Bench Seat Belt
- Confirm this listing matches your vehicle (1987-1992 Ford Ranger Standard Cab Front Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1987-1992 Ford Ranger Standard Cab Front Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1987-1992 Ford Ranger Standard Cab Front Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1987-1992 Ford Ranger Standard Cab Front Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
