Product Description
1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench Seat Belt
- One rear seat
- Retractable three-point belt
- Bezel trim not included
- Hardware included
- FMVSS 209 and 302 rated
Behind the seats of a 1988-1994 Xtracab, this single belt replaces one worn rear belt.
Vehicle Fit
Fits one rear seat of a 1988-1994 Toyota Pickup extended cab.
Choosing a Color
The single rear Xtracab belt comes in 52 colors.
Why Upgrade?
One rear belt often fails first.
Maintenance
Clean the rear strap gently and let it dry fully.
About the Xtracab Single Rear Belt
The rear area suits kids or cargo.
Pre-Install Checklist
Reuse your original trim bezel.
Good to Know
One rear belt for a Xtracab.
A single rear belt suits a Xtracab where only one side is worn or missing.
Match the shade to the other rear belt.
The rear pair is offered too.
Check the rear anchor for rust.
A working rear belt makes the back usable for passengers.
The belt retracts neatly out of the way.
Toyota added the Xtracab in 1984.
A single rear belt is the right choice when one rear position needs replacing.
This belt fits 1988-1994 Xtracab pickups only.
The trim bezel is not included, so reuse the original piece.
Rear belts in extended cabs are often crushed by cargo stored behind the seats.
Look for fraying, fading and a reel that will not wind in.
Check the rear anchor area for rust or stripped threads.
Matching the other rear belt keeps the space looking even.
Send us a photo if you are unsure which side or seat you have.
Seatbelt Planet makes each belt to order.
The Xtracab is a common choice for owners who want more room than a regular cab.
Many of these trucks were used for work and rear seats saw rough use.
Lay out old and new rear straps to check length and anchors.
If both rear belts are worn, the matching pair may be a better order.
Clean the anchor threads before fitting.
Test the buckle several times after fitting.
Keep the old bezel and its screws together.
A fresh rear belt makes the back of the cab usable again.
Fourth-generation Toyota pickups remain popular with collectors.
Older belts can lose strength from sun and age even if they look fine.
Protect the new strap from sharp tools stored behind the seats.
Choose a color that complements the rear trim.
The rear seat area is small, so route the strap carefully.
Buckle and release the belt a few times to confirm smooth action.
Original belts in these trucks are now decades old.
Many owners replace rear belts during a full interior refresh.
Our team can help you pick between single and pair orders.
Many Xtracab rear seats are small fold-down jump seats.
Measure before ordering if the seat was replaced.
Frequently Asked Questions
Single?
Yes.
Extended cab only?
Yes.
Bezel?
Not included.
Hardware?
Included.
Standards?
FMVSS 209 and 302.
Single belt?
Yes.
Bezel?
Not included.
Standard cab?
No.
Which side?
Either rear outboard side.
Questions about fit?
Call 574-226-6676.
1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1988-1994 Toyota Pickup, Extended Cab, Rear Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
