Product Description

1988-1998 GMC Truck, Standard Cab, Driver & Passenger Seat Belt Kit

• Driver and passenger belts
• End release buckles
• Bench or bucket seats
• Single retractor conversion
• FMVSS 209 and 302 rated

GMT400 GMC Sierras left the factory with a dual-retractor seat belt setup, and Seatbelt Planet notes that those retractors often become troublesome or quit altogether as they age. This driver and passenger kit replaces them with a simpler single-retractor arrangement and end release buckles, and the summary says it suits trucks with either a bench or bucket seats.

Fitment

Listed for 1988-1998 GMC standard cab trucks, driver and passenger positions, with bench or bucket seating.

Webbing Colors

Pick from 52 webbing shades; 13 are premium. The older description text quotes 32 colors, but the current option menu shows 52.

Why Replace?

When one of the two factory retractors seizes, the belt may hang loose or refuse to extend. Converting both front seats at once solves the problem on both sides and keeps the belts matched.

Belt Care

Let the strap rewind on its own, avoid pinching it in the door, and clean the webbing with a damp cloth and gentle soap.

About the 1988-1998 GMC Sierra Standard Cab

GMC launched the GMT400 Sierra for 1988 with a lower, more aerodynamic cab, independent front suspension on two-wheel-drive models and fuel injection across the range. These trucks are now popular modern classics.

Before You Install

Inspect the floor and pillar mounting points on both sides of the cab, clean their threads and look for rust under the carpet or mat.

Good to Know

Pair for both front outboard seats.

Seatbelt Planet's description was written with the Chevrolet twin in mind, but the GMC and Chevy cabs share the same layout.

Single-retractor belts have fewer moving parts to wear out.

Seatbelt Planet makes both belts to order in the chosen shade.

Ordering the pair together avoids mismatched webbing from separate orders.

Three listing photos show the parts Seatbelt Planet supplies.

A center belt is available separately for bench seat trucks.

Square-cut GMT400 cabs are roomy, and riders slide across the bench or settle into buckets comfortably, but only if the belts work. A seized dual retractor can leave the shoulder strap dangling or locked short, which is frustrating every time someone climbs in.

Owners keeping a Sierra as a daily driver often find this kit is the fix for belts that have become unreliable after decades of service.

Seatbelt Planet builds both belts after checkout, cutting the webbing fresh in your selected shade so the left and right straps arrive identical in color.

Frequently Asked Questions

Does it fit bench and bucket seats?
Seatbelt Planet's summary says it is for bench or bucket seats.

What buckle does it use?
End release.

Why a conversion?
Seatbelt Planet explains that the factory belts in these trucks used two retractors, which often fail with age; this kit updates them to a single retractor.

How many belts?
Two, for the driver and passenger.

Does the description mention Chevrolet?
Yes, the text was written for the Chevrolet twin, but the listing is titled for GMC.

Hardware?
Not specified in the listing.

Questions about fit?
Call 574-226-6676.