Product Description
1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench Seat Belt
- One outboard bench seat
- Retractable three-point belt
- Plastic push button buckle
- Hardware included
Seatbelt Planet's single bench belt for the 1989-1994 Toyota Pickup standard cab replaces one worn outboard belt with a retractable three-point belt and a plastic push button buckle.
Fit Details
For a single outer bench place, either side, in a 1989-1994 Toyota regular cab.
Color Choices
Pick from 52 colors for this single bench belt, ideally matching the other side.
Time for New Belts?
The driver belt in a high-mileage Toyota usually gives out first.
Caring for Your Belts
Spot-clean the single strap, then let it dry pulled out.
About the Toyota Pickup Single Bench Belt
These trucks are among the most durable small pickups of their era.
Pre-Install Checklist
Check the anchor and pillar mount on the side you are replacing.
Good to Know
One bench belt for one seat.
A single belt is the sensible choice when the passenger side of the bench is still in good shape and only the driver belt has frayed or stopped winding.
Toyota's 1989 pickup was a full redesign, with a longer cab and a more modern dash than the trucks it replaced.
Engines were the 2.4-liter 22R-E four and the 3.0-liter V6, and the four-cylinder trucks in particular are famous for lasting.
Match the webbing shade to the remaining belt so both sides look alike.
Inspect the floor anchor and B-pillar mount for that side, especially on trucks from snowy states.
The plastic push button buckle matches the look of the original Toyota belt.
These trucks were sold until the 1995 Tacoma took over, and survivors are now valued by Toyota fans.
Keep sand and grit out of the buckle.
Many of these trucks are still daily drivers, and a working driver belt is basic upkeep.
The bench pair and center lap belt are offered too.
Owners who keep their trucks for decades appreciate replacing parts one at a time.
The belt fits two-wheel and four-wheel-drive standard cabs with a bench.
Sun through the windshield fades webbing over the years, so a darker shade may hold up better.
Pick a shade that matches the seat cloth.
One side of a Toyota bench usually wears faster, most often the driver side.
Order the single belt to match the remaining one, or order the pair for a full refresh.
Regular cab Toyotas from this era came with either 22R-E four-cylinder or 3VZ-E V6 engines.
Many owners keep these trucks for decades, so a fresh belt is a worthwhile repair.
If the reel locks up or the strap is faded and stiff, it is time for a replacement.
Call 574-226-6676 for help with color matching.
Toyota sold the Pickup in two-wheel and four-wheel drive, and this belt suits the standard cab in either form.
Check the floor anchor area for rust before ordering.
Frequently Asked Questions
Single belt?
Yes.
Which seat?
Driver or passenger outboard.
Retractable?
Yes.
Buckle?
Plastic push button.
Hardware?
Included.
Will it fit a Xtracab?
No.
Will it fit a bucket seat?
No, choose the bucket belt.
Which side?
Either outboard position.
Hardware?
Included.
Questions about fit?
Call 574-226-6676.
1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1989-1994 Toyota Pickup, Standard Cab, Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
