1990-2002 International 4700, Driver or Passenger Seat Belt with 20" Cable Buckle

Product Description

The International 4700 is a workhorse medium-duty truck, used for everything from box trucks and dump bodies to utility service and fleet work. In a working cab, seat belts take a beating: they are pulled thousands of times, stepped on, exposed to dirt and sun, and often left until they fail. This Driver or Passenger Seat Belt with a 20" cable buckle from Seatbelt Planet replaces one outboard belt in a 1990-2002 International 4700.

The Seatbelt Planet 1990-2002 International 4700, Driver or Passenger Seat Belt with 20" Cable Buckle, sold by Vintage Car Radio, provides a single-position replacement designed for the demanding service environment of these medium-duty trucks.

The International 4700 series served a wide range of vocational and fleet roles throughout the 1990s and early 2000s. Built for durability and straightforward operation, these trucks accumulated high mileage in delivery, construction, utility and municipal service. The front seating position is upright and functional, and the driver belt in particular often shows the greatest wear after years of daily use. In many cases, only one side needs attention, making a full matched pair unnecessary.

This Seatbelt Planet product is a single 3-point lap-and-shoulder belt configured for either the driver or passenger position in the 1990-2002 International 4700 and equipped with a 20-inch cable buckle. The extended cable allows greater flexibility in buckle placement and reach, which can be especially useful in commercial cab layouts. The webbing is heavy-duty, UV-resistant polyester selected for strength and longevity under the conditions these trucks often see, available in colors that can be coordinated with common interior finishes. The buckle provides a clear, positive latch, and matching hardware that allows the belt to integrate cleanly with the existing cab.

The belt is manufactured to meet the performance requirements of FMVSS 209 for tensile strength, controlled elongation, abrasion resistance, and buckle function. Adjustment range accommodates different occupants while preserving the upright, practical seating position typical of these medium-duty trucks.

Installation is intended to work with the original mounting points. All necessary fasteners are included. In most cases, only limited preparation is required. Important: torque values and the assembly sequence must be taken exclusively from the instructions supplied with the kit. Correct tightening is essential for the system to perform as designed.

Owners or fleet operators who only need to replace one front belt gain a practical, focused improvement. The selected seat receives modern three-point protection with the specified 20-inch cable buckle, without forcing a complete front-seat replacement, and the 4700’s durable, work-oriented character remains unchanged.

Vintage Car Radio supplies this Seatbelt Planet belt with the correct hardware and guidance, keeping the installation process clear for both professional workshops and experienced owners.

The result is a simple, rugged update that restores proper restraint exactly where it is needed. The International 4700 keeps its identity as a hard-working medium-duty truck; the chosen front seat is brought back to a reliable standard. Order from Vintage Car Radio and equip the seat that requires attention with a restraint solution matched to this vocational classic.

What You Get

Seatbelt Planet describes this belt as a three-point retractable lap and shoulder seat belt with an end release buckle. Details include:

• One retractable 3-point lap and shoulder belt
• End release buckle
• 20-inch cable buckle
• Fits the driver or passenger position
• Listed for 1990-2002 International 4700 trucks

The belt is sold individually, so you can replace just the side that needs it. Fleet operators often replace the driver's belt more frequently, since it gets the most use.

Why a Cable Buckle?

A cable buckle mounts the buckle on a stiff steel cable rather than on webbing. The cable holds the buckle upright and in reach, which makes it easier to find and fasten, especially when the driver is getting in and out of the cab many times a day. The 20-inch length is part of what matches this belt to the 4700's seating layout. If your truck has an aftermarket or air ride seat that changes the buckle position, contact us before ordering so we can help confirm the right belt.

Choose from 52 Webbing Colors

Most work trucks use Black or Grey, and those are good choices for hiding dirt. If you want something more visible, the Webbing Color menu offers 52 colors in total. Options include Charcoal, Silver, Tan, Brown, Navy and Blue, as well as high-visibility shades such as Orange, Sunset-Orange, Speed-Yellow, Canary-Yellow, Neon-Green and Flame-Red, which some fleets use so supervisors can see at a glance whether a driver is buckled.

Why Replace Worn Belts

A frayed belt, a slow retractor or a buckle that does not latch cleanly can lead to failed inspections and, more importantly, a belt that does not protect the driver when it is needed. Commercial vehicles also face regular safety checks, and a damaged belt is an easy item to flag. Replacing it with a new belt restores proper function and keeps the truck ready for work.

Installation Tips

Photograph the original belt's routing and anchor points before removing it. Inspect the anchors for damage and corrosion and clean the threads. Keep the webbing flat and untwisted, and route the shoulder portion so it crosses the chest and collarbone rather than the neck. Tighten each bolt securely, test the retractor with a sharp pull to make sure it locks, and check that the buckle latches and releases cleanly. Hardware is not mentioned on this listing, so plan to reuse good original bolts or source proper seat belt hardware. If you prefer, a qualified truck or upfit shop can install the belt.