Product Description

1992-1996 Ford Bronco Rear Center Lap Belt

Seatbelt Planet's 1992-1996 Ford Bronco, Rear, Seat Belt. 2 Point Non-Retractable Lap Seat Belt Kit with All Metal Push Button Buckle

The fifth-generation Ford Bronco is having a moment. More owners are pulling these full-size SUVs out of barns to bring them back. Once the drivetrain is sorted and the interior goes back together, the back seat deserves the same attention as the front. The Seatbelt Planet 1992-1996 Ford Bronco Rear Center Lap Belt, sold by Vintage Car Radio, takes care of the seat that most often gets forgotten: the middle of the rear bench.

The Seatbelt Planet 1992-1996 Ford Bronco, Rear Center Lap Belt, sold by Vintage Car Radio, provides a dedicated rear-center restraint for these final-generation full-size Broncos.

The 1992-1996 Bronco marked the last chapter of Ford’s traditional full-size two-door SUV. With its robust truck-based chassis, available four-wheel drive and spacious interior, it remained a capable choice for families, weekend adventurers and anyone who needed genuine off-road ability with room for passengers. The rear bench could accommodate three adults when required, and the center position added useful flexibility. Over time, however, the original rear center belt is often the first to be removed, damaged or left unused. In many surviving examples, the outer rear belts may still be present while the middle position remains empty or fitted with a worn-out original.

This Seatbelt Planet product is a rear-center lap belt configured for the 1992-1996 Bronco. It uses strong, UV-resistant webbing that holds its appearance and strength over time, available in colors compatible with the interiors commonly found in these vehicles. The buckle is a solid, easy-to-operate design that provides a clear, positive latch. The overall approach is simple and functional, matching the occasional-use nature of the rear center seat.

The belt is manufactured to meet the relevant performance requirements of FMVSS 209 for strength and buckle function. As a lap-only design, it suits the center rear position while remaining straightforward to install and use.

Fitment is intended to work with the existing rear center mounting points. The necessary hardware is included. In most cases, only limited preparation is required. Important: torque values and the assembly sequence must be taken exclusively from the instructions supplied with the kit. Correct tightening is essential for the system to perform as designed.

Owners who still carry three passengers in the back of their Bronco gain a focused improvement in security. The center position receives effective lap restraint without altering the vehicle’s full-size, capable character or rear-seat layout.

Vintage Car Radio supplies this Seatbelt Planet belt with the correct hardware and guidance, keeping the installation process clear for both professional workshops and experienced owners.

The result is a practical, low-profile update that restores full three-across capability to the rear bench. The Ford Bronco keeps its identity as a classic full-size SUV; the middle rear seat is simply brought back to a functional standard. Order from Vintage Car Radio and equip the center rear position of your 1992-1996 Bronco with a restraint solution matched to its original passenger-carrying design.

Built for the Middle Seat

The rear center position in a Bronco of this era uses a simple lap belt, and that is exactly what this kit replaces. Seatbelt Planet describes it as a 2-point non-retractable lap seat belt kit with an all-metal push button buckle. It has no retractor and no shoulder strap, so there is little to go wrong. You set the length, latch it, and the belt stays where you put it.

That simplicity matters in a truck that lives a hard life. Broncos see mud, sand, dust, and the occasional rainstorm with the top off. A non-retractable lap belt has no spring mechanism to gum up, and a metal push button buckle has the solid, mechanical feel many owners prefer to plastic.

Match Your Interior

Thirty years of sun through the rear glass is rough on webbing. Originals fade, fray at the edges, and can end up looking out of place next to fresh upholstery. This belt is offered in 52 webbing colors, so matching fresh upholstery is easy. Specialty shades such as M-Stripe and the edge-stripe colors carry an upcharge shown in the color picker.

Black keeps a stock look. Edge-trimmed options add personality to a trail build.

Why Replace the Rear Center Belt?

It is easy to justify new front belts because you use them every drive. The rear center belt can sit buried in the seat crease for years, and that is exactly why it is worth checking. Hidden belts collect grit, get pinched by the folding seat, and are sometimes missing entirely after decades of previous owners. If you carry kids, friends, or a third passenger on the trail, that seat needs a belt that works.

Quick Specs

• Fits: 1992-1996 Ford Bronco, rear center seating position
• Type: 2-point non-retractable lap belt kit
• Buckle: all-metal push button
• Brand: Seatbelt Planet
• SKU: 501188
• Shipping: calculated at checkout

Installation Notes

Before you install, clean up the rear floor anchor points and look for rust or damaged threads, which is common on trucks that have seen water crossings or road salt. Solid anchors are as important as the belt. Route the webbing flat, with no twists, and tighten the anchor bolts properly. If you are not comfortable with the job, a qualified shop can install it quickly.

Get It From Vintage Car Radio

Vintage Car Radio supplies parts for owners who care about getting the details right in their classic vehicles. This belt finishes the back seat of your 1992-1996 Bronco properly. Pick your webbing color and add it to your cart.