Product Description
1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench Seat Belt
- One front bench outboard seat
- Retractable three-point belt
- All-metal push button buckle
- Hardware included
Seatbelt Planet's single bench belt for the 1992-1996 F-Series crew cab replaces one outboard front belt with a new retractable three-point belt and an all-metal push button buckle.
Where It Fits
For one outer seat, left or right, on a four-door 1992-1996 F-Series front bench.
Color Options
There are 52 webbing colors; specialty shades carry an upcharge.
Why Replace Old Belts?
A crew cab bench sees a lot of riders, and the outboard reels on high-mileage trucks are often slow or stuck.
Care Tips
Sponge the webbing with mild soap and keep mud and gravel off the buckle.
About the F-Series Crew Cab Single Bench Belt
With six-passenger seating and long beds, these trucks were often used to pull campers and horse trailers across the country.
Before You Install
Inspect the outboard floor anchor and the pillar mount for rust before fitting.
Good to Know
One crew cab bench belt.
Seatbelt Planet links this belt to its other seat belts for 1992-1996 crew cabs.
Order two if both outboard belts are tired.
Seatbelt Planet shows two images on this listing.
Crew cab benches in this generation were usually split 40/20/40 or full-width, and the outboard belts carry most riders.
The 1992-1996 crew cabs were F-250 and F-350 trucks, often with the 460 V8 or the 7.3-liter diesel, and they were built to tow.
A single belt suits a truck where only the driver side has failed.
Pick the shade that matches the remaining outboard belt.
Pull the strap out fully and let it rewind after fitting to check the reel.
Check the B-pillar mount carefully, since water can leak in around the rear door seal and rust the area.
Many of these trucks are used to tow fifth-wheel campers and stock trailers, and a good driver belt makes long trips more comfortable.
These four-door Fords are often called OBS crew cabs by enthusiasts, and their values have climbed in recent years.
Keep mud and gravel out of the buckle with a quick brush now and then.
If both outboard belts are worn, order two so they match.
Seatbelt Planet sews this crew cab belt after you pick a color.
Crew cab benches see heavy use from work crews, and the outer belts usually wear first.
Order the second side later if your budget for the project is split across seasons.
Keep the old belt until the new one is in hand so you can compare lengths and anchor styles side by side.
Frequently Asked Questions
Is it a pair?
No, it is one belt for one outboard position.
Which cab?
The four-door crew cab with a front bench.
Retractable?
Yes.
Buckle?
All-metal push button.
Hardware?
Included.
Is the center belt included?
No.
Is the center belt included?
No.
Does it fit a bucket seat crew cab?
No, choose the bucket version.
Does it fit the rear bench?
No, rear belts are separate.
Questions about fit?
Call 574-226-6676.
1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1992-1996 Ford F-Series, Crew Cab, Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
