Product Description
1993-1997 Mazda B Series Pickup, Extended Cab, Driver Seat Belt
- Driver seat
- Three-point retractable lap and shoulder belt
- End release buckle
- Extended cab
Mazda's mid-1990s B-Series Cab Plus trucks were close Ranger cousins. Seatbelt Planet's driver restraint for them is three-point retractable with an end release buckle.
Fitment
For the driver seat of a 1993-1997 Mazda B-Series extended cab. Note that the 1994 and later B-Series was built by Ford on the Ranger platform, while the 1993 truck was the earlier Mazda-designed model, so call us to confirm fit on a 1993.
Webbing Colors
Choose any of 52 webbing colors for this Mazda driver restraint.
Why Replace?
Climbing into a compact Cab Plus every day grinds the driver strap against the seat bolster until it frays.
Belt Care
Clean the Mazda driver strap with mild soap and water, then let it dry fully extended before it rewinds.
About the Mazda B-Series
From 1994 the B2300, B3000 and B4000 names matched their engine sizes, and the trucks shared their cab and much of their interior with the Ranger.
Before You Install
Look over the driver B-pillar mount and floor anchor before ordering.
Good to Know
Mounting bolts are not mentioned by Seatbelt Planet; reuse sound originals.
The passenger belt for the same truck is a separate listing.
Cab Plus was Mazda's name for the extended cab in these years, and the space behind the seats held small jump seats on some trucks.
Seatbelt Planet stitches the belt after you pick a webbing shade.
Owners who use a B-Series for daily work often find the driver reel slow to return after years of dust.
Pull the old strap all the way out and watch for cuts, glazing or a reel that stalls halfway back.
Black and gray webbing suit most B-Series interiors of this era.
A new driver belt is a practical refresh for a compact truck that still earns its keep.
The door jamb sticker will confirm your truck's build date.
Cab Plus trucks with the 4.0 liter V6 were popular towing rigs for small boats and campers, which kept drivers in the seat for long stretches and wore the shoulder strap where it crosses the collarbone.
Mazda's version of the Ranger-based truck had its own grille, badges and trim, but the cab structure and B-pillar layout match its Ford sibling closely.
A B-Series driver restraint that has been shut in the door repeatedly often shows a flattened, hardened edge where the door seal pinched it.
Owners selling a clean B-Series often replace a ragged driver belt first because it is the first thing a buyer touches.
If your truck has an aftermarket seat, confirm the buckle stalk still lines up before ordering.
Seatbelt Planet sews this driver strap once you pick the webbing tone.
Mazda B-Series Cab Plus driver restraints anchor beside the small rear storage area, and gear stacked there can rub the lower webbing.
Frequently Asked Questions
Which seat?
Driver.
Belt type?
Three-point retractable.
Which cab?
Extended cab.
Hardware?
Not stated by Seatbelt Planet.
Colors?
52.
Questions about fit?
Call 574-226-6676.
1993-1997 Mazda B Series Pickup, Extended Cab, Driver Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1993-1997 Mazda B Series Pickup, Extended Cab, Driver
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1993-1997 Mazda B Series Pickup, Extended Cab, Driver Seat Belt
- Confirm this listing matches your vehicle (1993-1997 Mazda B Series Pickup, Extended Cab, Driver), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1993-1997 Mazda B Series Pickup, Extended Cab, Driver Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1993-1997 Mazda B Series Pickup, Extended Cab, Driver Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1993-1997 Mazda B Series Pickup, Extended Cab, Driver?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
