Product Description
1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench Seat Belt
- Driver or passenger bench position
- Three-point retractable lap and shoulder belt
- End release buckle
- Hardware included
Either outboard Ram 2500 bench seat, driver or passenger, takes this single Seatbelt Planet lap and shoulder belt; it retracts, and an end release buckle latches it on 1994-1998 standard cabs.
Fit Details
For the driver or the passenger side of 1994-1998 Ram 2500 regular cab trucks with a bench.
Color Choices
The single Ram strap can be ordered in any of 52 webbing colors.
Time for New Belts?
Often only the driver belt in a Ram 2500 work truck is worn through, and replacing that one side is all the truck needs.
Caring for Your Belts
Clean this Ram 2500 belt with mild soap, then leave it pulled out until dry.
About the Dodge Ram 2500
Second-generation Rams sold strongly from the start, helping Dodge win a much bigger share of the full-size pickup market in the mid-1990s.
Pre-Install Checklist
On the Ram side being replaced, inspect its pillar anchor and floor bolt.
Good to Know
Hardware comes with the belt.
Ordering one belt lets a Ram owner replace the worn side and keep a good original on the other.
Pick a webbing color close to your remaining Ram belt so both sides look alike.
Driver side Ram belts often wear where they rub the seat edge and the door seal.
Order two of these singles, or the matching pair kit, if both outboard seats need help.
Questions about this Ram 2500 single belt? Call 574-226-6676.
On a 1994-1998 Ram 2500 bench, the driver outboard belt sees the most cycles, so it is common to replace only that side and keep a sound passenger belt.
Ram work trucks often carry one person most days, and the passenger side belt can stay nearly new while the driver strap wears through.
If you later decide to refresh the passenger side too, ordering the same webbing number keeps both Ram outboard straps visually matched.
A single Ram 2500 outboard belt is also handy when only one reel has failed, such as a locked-up retractor after water got into the pillar.
Heavy-duty Ram regular cabs from these years were common on job sites, where a quick-latching, smooth retracting driver belt makes repeated stops less annoying.
Faded webbing on an original Ram belt is often stiff, which makes it slow to retract even if the reel itself still works.
Second-generation Ram trim levels included the base WS, ST and better-equipped Laramie SLT versions, and the regular cab bench layout here suits those trucks.
Second-generation Ram cabs share a lot of interior parts across the 1500, 2500 and 3500, but Seatbelt Planet lists this single belt specifically for 2500 regular cabs.
Matching webbing color on one new and one old Ram belt is easier if you bring the old belt into daylight when comparing swatches.
Frequently Asked Questions
Is this one belt or two?
One belt, for either the driver or passenger outboard seat.
Which truck?
Bench-seat Ram 2500 regular cabs, 1994-1998.
Retractable?
Yes.
Hardware?
Included.
Colors?
52.
Questions about fit?
Call 574-226-6676.
1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1994-1998 Dodge Ram 2500, Standard Cab, Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
