Product Description
1998-2001 Ford Ranger Extended Cab, Center, Bench Seat Belt Kit
- Center bench seat
- End release buckle
- Hardware included
- Extended cab
- FMVSS 209 and 302 rated
An end release middle strap for the Ranger SuperCab bench, hardware included.
Fitment
The center front bench spot of a Ranger SuperCab built 1998-2001, though the text says 1998-2000.
Webbing Colors
Your Ranger middle bench strap can be any of 52 webbing tones; copy says 32.
Why Replace?
Middle belts often vanish into the seat gap and get crushed.
Belt Care
Pull the strap out of the gap now and then and wipe it clean.
About the Ford Ranger
The middle place in a compact truck bench is snug but handy for a third rider.
Before You Install
Check the middle floor anchors before ordering.
Good to Know
Hardware is included.
Match the shade to the outer belts.
Seatbelt Planet makes it to order.
Call 574-226-6676 to confirm your year.
A small part that completes the bench.
The title shows 1998-2001 and the description shows 1998-2000, so call to confirm fit for a 2001 truck.
Middle belts often get lost in the seat crease, and this part restores a usable third position.
Hardware comes with the belt, helpful if your original mounting bolts are corroded.
Match the color to your outer bench belts for a consistent look.
In a Ranger SuperCab with a bench, the middle front position is snug but useful for a third passenger on short trips.
This single belt from Seatbelt Planet uses an end release buckle and comes with mounting hardware.
It is the right part when the two outer belts are still in good condition.
Seatbelt Planet makes it to order in your chosen shade.
If the outer belts are also worn, the three-belt kit covers the whole bench in one order.
Keep the latch clear of debris so it continues to work smoothly.
A working middle belt makes the bench fully usable for three again.
If your Ranger SuperCab bench has a fold-down center backrest, the middle strap tucks below it, which helps explain why it is so often forgotten until someone needs to ride there.
Before buying, fold the backrest section down and look closely at the buckle that the center tongue plugs into, since a cracked housing or sticky button is common in older Rangers.
Seatbelt Planet stitches this end release center strap after you choose a color, and the mounting hardware ships alongside it.
A center restraint that works is a small but genuine improvement for any Ranger owner who sometimes carries a third rider on errands.
Center restraints for compact pickups are short parts, and the length Seatbelt Planet offers suits the narrow middle of a Ranger SuperCab bench, though a call to compare against your original is always welcome before you buy.
Expect the strap to arrive with the bolts needed to anchor it to the floor.
Frequently Asked Questions
Which seat?
Middle of the front bench.
Which cab?
SuperCab.
Years?
Title 1998-2001; text 1998-2000.
Hardware?
Included.
Buckle?
End release.
Questions about fit?
Call 574-226-6676.
1998-2001 Ford Ranger Extended Cab, Center, Bench Seat Belt Kit specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1998-2001 Ford Ranger Extended Cab, Center, Bench
- Kit listing — see overview for which seating positions / belt count are included
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1998-2001 Ford Ranger Extended Cab, Center, Bench Seat Belt Kit
- Confirm this listing matches your vehicle (1998-2001 Ford Ranger Extended Cab, Center, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1998-2001 Ford Ranger Extended Cab, Center, Bench Seat Belt Kit manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1998-2001 Ford Ranger Extended Cab, Center, Bench Seat Belt Kit
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1998-2001 Ford Ranger Extended Cab, Center, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.