Product Description
Most classic vehicles came with a single speaker in the dash. If you have upgraded to a stereo radio, that one speaker cannot give you true stereo. The Kenwood Dual Speaker Assembly puts two Kenwood speakers in the factory dash location, so you get left and right channels without cutting the dash.
What It Is
This assembly mounts two Kenwood speakers on one plate that fits the original dash speaker opening. The listing rates it for 50 to 70 watts of power, which is a good match for modern classic car radios such as the Ken Harrison KHE-300 and Custom Autosound models.
Features
- Two Kenwood speakers in a single dash assembly
- Stereo sound from the factory mono speaker location
- Rated for 50 to 70 watts
- Fits most classic vehicles
- Year, Make, Model and Factory Air selections so we send the right assembly
About Bluetooth
This listing's name mentions Bluetooth because it is offered with Bluetooth-equipped radios. The speakers themselves do not receive Bluetooth; streaming comes from a Bluetooth radio, such as the KHE-300, that drives them.
Will It Fit?
Before ordering, measure your original dash speaker opening and the depth behind it. Tell us your vehicle's Year, Make and Model, and whether it has factory air, since air conditioning ducts can change the space behind the dash. If you are still unsure, email sales@vintagecarradio.com and we will help.
Why Kenwood
Kenwood car speakers are popular around the world for clear, dependable sound. In a dual assembly, they bring a noticeable step up from tired original paper speakers while keeping the dash looking stock.
Installation Tips
Remove the old speaker and check its mounting before installing the new assembly. Connect the left and right channels correctly; reversing them will not damage anything, but it swaps the stereo image. Make sure no wires touch the speaker cones, and test at low volume before turning it up.
Completing the System
Many owners pair a dual dash assembly with a rear speaker pair and use the radio's fader to balance front and rear. That gives full stereo throughout the cabin with very few changes to the car.
Dual Speakers or a Dual Voice Coil Speaker?
A dual voice coil speaker plays both channels through one cone and has more cone area for bass, but it is rated at 4 ohms and needs the right mounting depth. A dual assembly like this one uses two separate speakers on a plate. If you are not sure which suits your dash, tell us your vehicle and we will recommend one.
Kenwood Dual Speaker Assembly FAQ
What does a dual speaker assembly do?
It puts two speakers in the factory dash location for stereo sound.
How much power can it handle?
It is rated for 50 to 70 watts.
Do the speakers have Bluetooth?
No. Bluetooth comes from the radio that drives them.
Why do you ask about factory air?
Air conditioning parts can change the space behind the dash.
How do I know it will fit?
Measure your opening and tell us your vehicle, or email sales@vintagecarradio.com.
KHE-300 specifications
- Ken Harrison KHE-300 vehicle-specific classic car radio (fitment per listing title)
- Bluetooth wireless audio streaming (music streaming; not all listings advertise hands-free calling)
- Front USB input for MP3 files
- Front mini SD card reader
- PLL synthesized AM/FM tuner with automatic mono/stereo
- 6 AM and 6 FM presets; preset scan and auto store
- Manual up/down tuning, seek and auto scan
- Separate bass and treble; front/rear fader; left/right balance
- LCD display with blue illumination and clock
- Auto antenna power lead; RCA pre-outs; rear auxiliary input
- 200 watts system power (50 watts × 4 channels)
- 12 V negative-ground (6 V / positive-ground cars need a converter)
KHE-300 wiring and tech tips
Ken Harrison manuals recommend installation by an auto radio specialist if you are not comfortable with 12 V work.
- Confirm the vehicle is 12 V negative ground before connecting (use a converter for 6 V or positive-ground cars).
- Disconnect a battery terminal before wiring.
- Use a fused power source and a clean chassis ground.
- Bench-test the radio before final mounting when practical.
- Connect the antenna lead and the auto-antenna power wire only if your antenna is compatible.
- Match speaker polarity; do not short speaker leads to ground.
Application: classic car (confirm fitment from the product title before install). Vintage Car Radio does not offer installation.
KHE-300 manuals
Use the Ken Harrison owner’s sheet packed with the radio for the official wiring diagram and controls. Additional classic-radio manuals are listed on our Manuals page when available.
Vintage Car Radio does not offer installation.
Warranty
Warranty coverage for Ken Harrison radios is handled per the manufacturer’s and seller’s published terms for your purchase. Contact Vintage Car Radio at 844-802-4499 or 574-226-6676 with your order number for assistance.
Vintage Car Radio does not offer installation.
FAQ — classic car KHE-300
Will this fit my dash?
Ken Harrison radios are vehicle-specific. This listing is for classic car as titled—compare your opening and faceplate to the photos.
Does Bluetooth include hands-free calling?
KHE-300 listings emphasize wireless audio streaming. Confirm calling support on the product page for your exact SKU.
Do you install?
No.
Need help?
844-802-4499 or 574-226-6676.
Specs
Wiring / Tech Tips
Manuals
Warranty
Warranty
Warranty coverage for Ken Harrison radios is handled per the manufacturer’s and seller’s published terms for your purchase. Contact Vintage Car Radio at 844-802-4499 or 574-226-6676 with your order number for assistance.
Vintage Car Radio does not offer installation.
