Product Description
1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench Seat Belt Kit
- Front bench driver and passenger
- Retractable three-point belts
- Plastic push button buckles
- Hardware included
Dodge offered one of the first factory four-door four-door crew cabs back in 1963, and its 1976-1985 crew cabs are now prized by truck collectors. Seatbelt Planet's front bench kit replaces both outboard belts with retractable three-point belts.
Fitment
For the two outer front bench places in a four-door Ram 150 built from 1976 to 1985.
Webbing Colors
All 52 webbing colors are offered for this crew cab pair, with a surcharge on specialty shades.
Why Replace?
Crew cabs were often fleet or work trucks, carrying crews every day, and the front belts in survivors are usually tired.
Belt Care
Clean using diluted soap and water, and let the belts dry before retracting.
About the Ram 150 Crew Cab Front Belt Pair
Dodge dropped the crew cab after 1985 and did not offer a four-door pickup again until the Quad Cab of the late 1990s, which makes these trucks especially sought after.
Before You Install
Check the front floor anchors and B-pillar mounts, which can rust on trucks that have lived outdoors.
Good to Know
Both front outboard belts for a crew cab.
Front center and rear belts for these trucks are listed separately.
The two crew cab belts are cut from one webbing run.
Crew cab survivors are uncommon, and new belts are easier to find than good used ones.
The reels keep the straps tidy against the pillars.
Crew cab trucks were long, heavy and often used as fleet vehicles by utilities, railroads and contractors, which means many survivors have high mileage and worn interiors.
Check the upper mount on each B-pillar carefully, since water can collect around the door seals.
Many owners now use these trucks to tow campers and boats, and the cab carries the whole family.
A fresh front pair is a good first step for any crew cab restoration.
One webbing run supplies both crew cab belts.
The reels keep the straps tidy against the pillars.
Pick the same shade for the rear belts if you order them later.
Crew cab survivors are often found with mismatched belts from years of repairs, and a fresh pair brings the front back to a single look.
Draw each crew cab belt out to its end once, then watch it rewind.
The crew cab pair ships with hardware.
Rear bench belts for the four-door come separately.
Webbing is cut once you choose.
Frequently Asked Questions
Which cab?
The four-door Crew Cab.
Front or rear?
Front bench outboard seats.
Retractable?
Yes.
Buckle?
Plastic push button.
Hardware?
Included.
Does this kit include the front center belt?
No. Seatbelt Planet sells the crew cab's front middle lap belt on its own.
Are the rear seat belts included?
No. Rear belts for these trucks are listed separately.
Will it fit a W150 four-wheel-drive crew cab?
Seatbelt Planet lists the Ram 150 crew cab; call us to confirm for four-wheel-drive trucks.
Questions about fit?
Call 574-226-6676.
1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench Seat Belt Kit specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench
- Kit listing — see overview for which seating positions / belt count are included
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench Seat Belt Kit
- Confirm this listing matches your vehicle (1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench Seat Belt Kit manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench Seat Belt Kit
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Driver & Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
