Product Description
1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench Seat Belt
- One rear outboard position on the back bench
- Two-point retractable lap belt
- Plastic push button buckle
- Mounting hardware included
- Sold as a single belt
For the back seat of a 1976-1985 Dodge Ram 150 Crew Cab, Seatbelt Planet builds this retracting lap belt for one outer position, with a plastic push button latch and mounting hardware supplied.
Where It Fits
Driver side or passenger side outboard seating on the rear bench of four-door Ram 150 Crew Cab pickups between 1976 and 1985.
Color Options
Pick the strap color from 52 webbing choices offered by Seatbelt Planet, which includes shades close to the blue, tan and red interiors these trucks often wore.
Why Replace Old Belts?
Rear bench belts in a crew cab Dodge have usually carried kids, coworkers and hunting gear for decades, and many are now torn, stained or stuck inside their retractors.
Care Tips
Clean the crew cab belt with a mild detergent solution and a sponge, then let it dry while pulled out so moisture does not get trapped in the reel.
About the Dodge Ram 150 Crew Cab
Dodge was one of the first manufacturers to offer a factory four-door crew cab pickup, starting in the 1960s, and the body style remained in the lineup through the 1985 model year.
Before You Install
Look over the rear floor anchor points on the side you are replacing, and check that the seat cushion still sits properly so the buckle can reach its partner.
Good to Know
Mounting hardware is part of the order, and the crew cab belt is woven in whatever shade you specify.
A matching rear driver and passenger kit is also listed by Seatbelt Planet for owners who want both sides renewed together.
Crew Cab Rams carried six adults on two full benches, a big reason they were favored by work crews, ranchers and large families.
The 150 designation marked the half-ton chassis, while 250 and 350 versions with heavier springs shared the same cab layout.
Retractable lap belts stay off the floor when the seat is empty, which keeps the webbing cleaner and out of the door jamb.
Seatbelt Planet sells the same belt under Ram 250 and Ram 350 names, and this listing follows the Ram 150 version.
Call 574-226-6676 with crew cab fitment questions.
Second-row seat belts in these big four-door Dodges were often left buckled behind the cushion for years, which flattens and creases the webbing at the latch.
A Ram 150 Crew Cab still turns heads at truck shows because so few survived hard ranch and job site service, and fresh rear belts help an original-looking cabin.
The long wheelbase of a crew cab Ram gives a smooth highway ride, which helped these trucks double as tow vehicles for campers and horse trailers.
Frequently Asked Questions
Which seat does this fit?
One outboard position on the rear bench of a 1976-1985 Dodge Ram 150 Crew Cab, either the driver or passenger side.
Is it a lap belt or a three-point belt?
A two-point lap belt with a retractor.
What buckle is used?
A plastic push button buckle.
Is hardware included?
Yes.
Is the photo the exact belt?
Yes, it is Seatbelt Planet's own photo of this belt. Only the webbing color may differ, since yours is made in the color you pick.
Questions about fit?
Call 574-226-6676.
1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1976-1985 Dodge Ram 150, Crew Cab (4-Door), Rear Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
