Product Description
1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench Seat Belts
- Driver and passenger bench positions
- Retractable three-point belts
- Plastic side release buckles
- Hardware included
- FMVSS 209 and 302 rated
The fourth-generation Toyota Pickup of 1984-1988, along with the 1983 models before it, became one of the most loved small trucks ever built. Seatbelt Planet's pair for 1983-1988 standard cab trucks fits both outer bench seats with reel-type three-point belts, supplied with hardware and FMVSS 209/302 rated.
Fitment
Listed for the driver and passenger bench positions of 1983-1988 Toyota Pickup standard cab trucks. It does not fit the T-100.
Webbing Colors
Choose from 52 webbing colors, 13 premium.
Why Replace?
These trucks are often still in daily use, and their belts are worn from decades of work. A matched pair restores comfort and appearance.
Belt Care
Clean with mild soap and keep tools and cargo off the webbing.
About the 1983-1988 Toyota Pickup Bench
Toyota's 1984-1988 pickups, including the four-wheel-drive versions, earned a near-legendary reputation for durability and remain in demand today.
Before You Install
Confirm a standard cab and bench seat, then clean all anchor threads.
Good to Know
Two bench belts.
Both belts share the color you choose.
Retractors keep the straps tidy on the bench.
A center lap belt is listed separately.
These trucks were sold in large numbers, and many are still on the road with their original belts. After decades of use, those bench belts tend to fray, fade or reel in slowly.
This pair is listed for bench-seat standard cabs. Extended cab trucks use different belts.
Look over the floor near each anchor for rust before fitting, especially in trucks from snowy regions.
Unbuckled, both straps wind back toward the rear wall.
A matched pair from the same webbing lot keeps both sides consistent.
Owners often swap belts when a new seat cover or mat goes in.
If only one side is worn, a single belt is also listed.
Rated FMVSS 209/302 by the maker.
Keep the buckles free of dirt and grit.
Trucks from these years are prized by collectors and off-road fans.
Toyota pickups of this era came in short and long bed versions, and both use the same standard cab belts. Seatbelt Planet does not separate the listing by bed length.
Seatbelt Planet notes the belts are made for the driver and passenger positions on the bench, so the middle rider needs the separate center lap belt.
Both bench belts are sewn after you choose a color. Comparing the swatches with your seat cover in daylight helps you choose a shade that looks right in the cab.
Frequently Asked Questions
Bench seat?
Yes, the two outboard positions.
Retractable?
Yes.
Buckle?
Plastic side release, per Seatbelt Planet's details.
Hardware?
Included.
Which cab?
Standard cab only; not the T-100.
Standards?
FMVSS 209 and 302.
Does it include a center belt?
No, the center lap belt is listed separately.
Will it fit an extended cab?
No, Seatbelt Planet lists it for standard cab trucks only.
Questions about fit?
Call 574-226-6676.
1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench Seat Belts specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench Seat Belts
- Confirm this listing matches your vehicle (1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench Seat Belts manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench Seat Belts
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
