Product Description
1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket Seat Belts
- Two bucket seats
- Retractable three-point belts
- Plastic side release buckles
- Hardware included
- FMVSS 209 and 302 rated
SR5 and sport-trim Toyota Pickups of 1983-1988 were often ordered with bucket seats. Seatbelt Planet's pair fits each bucket with a reel-fed three-point strap, hardware supplied, FMVSS 209/302 rated.
Fitment Notes
Fitment: both buckets in 1983-1988 Toyota standard cabs. It does not fit the T-100.
Available Colors
Choose from 52 colors, 13 premium.
Why New Belts Matter
Bucket seat belts in these trucks fray where they rub the seat side bolsters. A fresh pair fixes both seats.
Keeping Them Like New
Clean with mild soap and keep the buckles clear of dirt.
About the 1983-1988 Toyota Pickup Buckets
Sport-trim pickups with bucket seats and a console were popular with younger buyers in the eighties, and they remain sought after.
Pre-Install Checklist
Check the seats and cab, then clean all threads.
Good to Know
Two bucket seat belts.
Both belts share your color choice.
A bench version is listed separately.
Bucket seat trucks of these years often came with a center console between the seats, and the buckles mount beside it. A fresh pair of belts restores both seats in one step.
Bucket-seat standard cabs only.
Before fitting, check the floor near each anchor for rust.
When released, both straps reel back off the sport seats.
Both carry FMVSS 209/302 ratings.
Both belts share the webbing color you choose.
Many owners refresh the belts while the seats are out for new covers or foam.
These sport-trim trucks are especially popular with collectors, and a tidy interior adds to their appeal.
Toyota's SR5 trucks of the eighties are known for their sport seats and extra gauges. Matched belts suit those well-equipped cabs.
Seatbelt Planet makes both belts in the color you select.
Seatbelt Planet notes the pair fits only standard cab pickups and not the T-100. Check that your truck still has its factory bucket seats, since the buckle mounts beside the console differ from bench trucks.
Fresh belts in sport-trim trucks pair nicely with new seat covers and a clean dash.
The pair is sewn after you choose, so hold swatches against the seats first. Bucket-seat trucks often had bolder interiors than base models, with red, blue or tan cloth, and the 52-color range covers those well. A fresh matched pair of belts finishes the cab nicely.
Sport bucket seats in these trucks had higher side bolsters than the bench, and belts that rub them wear faster. Fresh belts reset that clock.
If one side is fine, a single belt is offered as well.
Toyota offered these sport-trim trucks with two- and four-wheel drive, and this pair is listed for standard cab bucket-seat trucks of either type.
Frequently Asked Questions
Bucket seats?
Yes.
Two belts?
Yes.
Buckle?
Plastic side release, per Seatbelt Planet's details.
Hardware?
Included.
Which cab?
Standard cab only; not the T-100.
Standards?
FMVSS 209 and 302.
Will it fit a bench seat?
No, it is for bucket seats.
Can I buy one belt?
Yes, a single bucket seat belt is listed.
Questions about fit?
Call 574-226-6676.
1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket Seat Belts specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket Seat Belts
- Confirm this listing matches your vehicle (1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket Seat Belts manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket Seat Belts
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1983-1988 Toyota Pickup, Standard Cab, Driver & Passenger, Bucket?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
