1991-1996 Chevrolet Caprice, Seat Belt Driver or Passenger with Bench Seat

Product Description

The 1991-1996 Chevrolet Caprice, with its rounded body and roomy bench seats, has developed a loyal following, from Impala SS fans to collectors of the 9C1 police cars and the big wagons. After 30 years of use, the front belts are often worn, slow to retract or unpleasant to use. This Seatbelt Planet Driver or Passenger Seat Belt replaces one front outboard belt in a Caprice with a bench seat.

The Seatbelt Planet 1991-1996 Chevrolet Caprice, Seat Belt Driver or Passenger with Bench Seat, sold by Vintage Car Radio, provides a single-position replacement for the front bench of these final-generation full-size Chevrolets.

The 1991-1996 Caprice represented the last traditional body-on-frame full-size Chevrolet sedan and wagon. Built for comfort, durability, and high-mileage service, it was widely used by families, fleets, and law-enforcement agencies. The wide front bench allowed three-across seating, making the car practical for everyday passenger carrying. Over years of heavy use, one side of the bench—most often the driver’s position—typically shows the greatest wear. In many cases only a single belt needs replacement, making a full matched pair unnecessary.

This Seatbelt Planet product is a single 3-point lap-and-shoulder belt configured for either the driver or passenger position on the 1991-1996 Caprice front bench. The webbing is a strong, UV-resistant polyester that retains its strength and appearance over time, available in colors that can be coordinated with common interior shades. The buckle is a solid metal design with a positive, mechanical latch. Matching hardware allows the belt to integrate cleanly with the existing cabin.

The belt is manufactured to meet the performance requirements of FMVSS 209 for tensile strength, controlled elongation, abrasion resistance, and buckle function. Adjustment range accommodates different occupants while preserving the upright, comfortable seating position of these full-size cars.

Installation is intended to work with the original mounting points. All necessary fasteners are included. In most cases, only limited preparation is required. Important: torque values and the assembly sequence must be taken exclusively from the instructions supplied with the kit. Correct tightening is essential for the system to perform as designed.

Owners who only need to replace one front belt gain a practical, focused improvement. The selected seat receives modern three-point protection without forcing a complete front-bench replacement, and the Caprice’s traditional full-size character remains unchanged.

Vintage Car Radio supplies this Seatbelt Planet belt with the correct hardware and guidance, keeping the installation process clear for both professional workshops and experienced owners.

The result is a simple, effective update that restores proper restraint exactly where it is needed. The Chevrolet Caprice keeps its identity as a durable, high-mileage full-size sedan; the chosen front seat is brought back to a reliable standard. Order from Vintage Car Radio and equip the seat that requires attention with a restraint solution matched to this classic American sedan.

What You Get

Seatbelt Planet describes this belt as a three-point retractable lap and shoulder belt with an all-metal push button buckle:

• One retractable 3-point lap and shoulder belt
• All-metal push button buckle
• For the driver or passenger position
• For cars equipped with a front bench seat
• Listed for 1991-1996 Chevrolet Caprice

The belt is sold individually, so you can replace only the side that needs it. Order two if both front belts need replacing.

Bench Seat vs. Bucket Seat

Seat belts for the Caprice differ depending on the seating layout, because the buckle position and lengths change between a bench and bucket seats. This listing is the bench seat version. If your Caprice has front bucket seats, contact us and we will help you find the correct belt.

All-Metal Push Button Buckle

An all-metal push button buckle has a sturdy feel and a classic look. You press the button on top of the buckle to release the tongue. Metal construction holds up well to years of daily use, which suits a car that is often still driven regularly.

Choose from 52 Colors

The Webbing Color menu offers 52 colors. Grey, Charcoal, Black, Silver, Navy, Blue, Tan, Desert-Tan, Medium-Beige, Maroon and Red-Wine cover the interior colors these cars commonly wore. If you want something different, there are many other choices, including bright reds, blues, greens, yellows and oranges, plus M-Stripe and colored edge options.

Why Replace the Front Belts

Front belts in a car this age have been pulled tens of thousands of times. Retractors weaken, webbing frays where it passes through the guides, and buckles wear. A new belt restores smooth retraction and reliable latching, which makes the car more pleasant and safer to drive.

Installation Tips

Before removing the old belt, photograph its routing and how each end is mounted. Inspect the anchor points for corrosion and clean the threads. Keep the webbing flat and untwisted, route the shoulder belt so it crosses the chest and collarbone rather than the neck, and tighten each bolt securely. Test the retractor with a sharp pull and make sure the buckle latches and releases cleanly. Hardware is not mentioned on this listing, so plan to reuse good original bolts or use proper seat belt hardware. If you prefer, a qualified shop can install the belt.