Product Description
1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt
- All metal style buckle
- Lap and shoulder belt
- Standard cab bench seat
- Mounting hardware included
- One seat per belt
- FMVSS 209 and 302 rated
The 1993-1997 Ford Ranger was one of the best-selling compact pickups of its time, and many still serve as daily drivers and work trucks. This lap and shoulder belt replaces either the driver or passenger belt in a standard cab Ranger with a bench seat.
Fitment
It uses an all-metal style buckle and comes with mounting hardware. Each belt handles one outboard position, so order two to redo both sides. Seatbelt Planet lists it for 1993 through 1997 standard cab Rangers fitted with a bench. SuperCab trucks and bucket-seat trucks are covered by other listings.
Webbing Colors
Fifty-two colors are available, from black and gray to bright shades. A few specialty colors add a small charge. Rangers of this era usually had gray, blue or tan interiors, and each has a close standard match.
Why Replace Old Belts?
Rangers are popular work trucks and first trucks. Thirty years of daily use wear out the retractor and webbing, and slow retraction is a common complaint. A new lap and shoulder belt restores smooth operation and peace of mind for whoever drives.
Caring for Your Belts
Keep the retractor area clean, and do not let the strap get caught in the door. Wash the webbing with mild soap if it gets dirty, and let it dry before retracting. Replace any belt that has been worn in a crash.
About the Ford Ranger Standard
Ford's 1993 refresh gave the Ranger rounded styling and a new interior, and that design stayed through 1997 before another update. Rangers from this era are known as reliable, simple trucks that are easy to keep running.
Before You Install
Check the B-pillar anchor and the floor mounting point for rust before you start. Since hardware is included, you will not need to source bolts, but you should still clean the threads. Route the shoulder portion so it crosses the chest without rubbing the neck.
Good to Know
Some Ranger owners swap in seats from other trucks, which can change where the belts sit. If your truck still has its original bench, this belt should line up with the factory points. If the seat has been changed, measure the anchor locations before ordering. Getting the geometry right ensures the shoulder portion crosses the chest correctly, which is key for comfort on long drives as well as for protection.
Frequently Asked Questions
Is this a pair?
No. One belt covers either the driver or passenger.
Is mounting hardware included?
Yes.
Does it fit a SuperCab Ranger?
This listing is for the standard cab with a bench.
Will the new belt retract better than my old one?
A worn retractor is often why old Ranger belts hang loose or retract slowly. A new belt comes with a fresh retractor mechanism, so it should pay out and wind back smoothly once it is mounted correctly and the webbing is not twisted.
Still unsure about fit on your Ford Ranger Standard?
Call 574-226-6676.
1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1993-1997 Ford Ranger Standard Cab, Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
