Product Description

1993-2000 Acura Integra, Sedan, Rear Driver & Passenger Seat Belt Kit

Seatbeltplanet.com's™ 1994-2000 Acura Integra, Sedan, Rear Driver & Passenger Seat Belt Kit. 3 Point Retractable Lap & Shoulder Seat Belt Kit with End Release Buckle

• Retractable 3 Point Lap & Shoulder Belt
• End Release Buckle
• Rear Driver & Passenger Seating Position
• Sedan Only, Does Not Fit Coupe or Hatchback
• Hardware Included

Integra sedans were often family cars, which means the back seat saw years of kids, car seats, groceries, and spilled drinks. The rear outboard belts take a surprising amount of abuse, and by now many are faded, grimy, or slow to retract. The Seatbelt Planet Acura Integra Sedan Rear Driver & Passenger Seat Belt Kit replaces both rear outboard belts, giving the back of your four-door a clean, functional set.

Year Range

The product title lists 1993-2000. The description on the page reads 1994-2000 Acura Integra sedan. Because the third-generation Integra started with the 1994 model year in the US, check your car before ordering. Vintage Car Radio can help confirm fitment if you are not sure.

Kit Contents

According to the listing, this is a 3-point retractable lap and shoulder seat belt kit with end release buckles for the rear driver-side and passenger-side positions.

A Different Kind of Wear

Rear belts age differently from front belts. They get less daily use, but they suffer in other ways:

• Retractors that sit for long periods can lose spring tension.
• Rear deck sun exposure fades the shoulder portion of the webbing, often unevenly.
• Belts get trapped between the seat back and cushion, leaving creases and grime.
• Child seat installations can wear webbing at contact points.

If the rear belts in your sedan show any of these, a new pair will make the back seat feel fresh again. Your passengers will notice the difference the first time the belt pulls out smoothly and rewinds without help.

Restoration Angle

For owners taking an Integra sedan back to factory condition, mismatched belts are one of those details that keep an interior from looking right. New upholstery next to sun-bleached belts stands out. Installing this kit along with the front kit gives every outboard seat matching webbing.

Available Colors

There are 52 webbing colors to pick from, and the specialty group (M-Stripe, the edge colors, Miami Blue, Acid Green, Bone, White and a few others) carries an upcharge listed in the picker. Stick with black for a stock look, or match a colored edge you chose for the front.

Product Details

• Vehicle: Acura Integra sedan (see year note)
• Positions: rear driver and rear passenger
• Type: 3-point retractable lap & shoulder
• Buckle: end release
• SKU: AC-54511
• Shipping: calculated at checkout

Install Notes

The rear seat cushion and back usually need to come out to reach the lower anchors, and the retractors typically sit under the rear deck area. Clean and inspect each anchor point, install the belts without twisting the webbing, and tighten all hardware securely. Test both retractors before reassembling the seat.

Finish the Back Seat

Add the rear center lap belt to cover all three rear positions. Vintage Car Radio sells and ships all three Integra sedan belt options. If you would like help putting together the right combination for your car, just contact our team.