Product Description
1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit
Seatbeltplanet.com's™ 1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit. 3 Point Retractable Lap & Shoulder Seat Belt Kit with End Release Buckle
- Retractable 3 Point Lap & Shoulder Belt
- End Release Buckle
- Driver & Passenger Seating Position
- Hardware Included
There is a moment every Miata owner knows: dropping into the low seat, pulling the belt across, and heading out for a drive with the top down. It is one of the simplest pleasures in motoring. When the belts are frayed, faded, or slow to rewind, it takes a little shine off that moment. It is also a sign that the belts are overdue for attention. The Seatbelt Planet 1999-2000 Mazda Miata Driver & Passenger Seat Belt Kit puts new belts in both seats of your early NB.
In the Box
According to the product listing, this kit contains 3-point retractable lap and shoulder seat belts with end release buckles for the driver and passenger seating positions. Hardware is included.
Why Do Both?
If you are already planning to replace one belt, there are good reasons to do the pair:
- Matching look. New webbing on one side and old, faded webbing on the other is obvious in a two-seat car.
- Matching feel. Both belts will retract and latch the same way.
- One job. The trim and tools are the same for both sides, so it makes sense to do them together.
- Restoration-ready. If the car is getting new seat covers or carpet, matching new belts complete the interior.
For Drivers Who Use Their Miatas
Miatas are made to be driven, and plenty of owners take them to autocross events, track days, and spirited canyon runs. The belts in a car used that way see more stress than in a commuter car. Fresh belts help make sure the restraint system in your roadster is in good condition for the way you drive it. (If you compete, always follow your event's specific safety rules.)
Webbing Colors
Webbing is offered in 52 colors, from black and the classic edge stripes to brights and earth tones, and specialty shades such as M-Stripe, the edge colors, Bone and White carry an upcharge shown in the color picker. A matching set in Red-Edge or Blue-Edge can look sharp against a black interior. Black keeps it factory.
Specifications
- Vehicle: 1999-2000 Mazda Miata
- Positions: driver & passenger
- Type: 3-point retractable lap & shoulder
- Buckle: end release
- Hardware: included
- SKU: 51510
- Shipping: calculated at checkout
A single-belt version is also available if you only need one side.
Installation
The Miata's small cabin makes access a little tight, but the job is manageable. Move the seats fully forward, remove the trim panels behind the seats, and note the routing of each belt. Remove and replace one side at a time so you always have a reference. Use the included hardware, tighten firmly, and test each belt by pulling sharply to confirm the retractor locks. Then let it wind back in and check that it sits neatly against the trim.
From Vintage Car Radio
This kit ships directly from Vintage Car Radio. Have questions about colors or fitment? Get in touch with our team before ordering and we will help.
1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit: Frequently Asked Questions
Is this made for the 1999-2000 Mazda Miata?
It's listed specifically as the 1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit.
Which webbing colors are offered?
There are 52 webbing colors in the menu, including OrangeEdge, Lime-Green, Desert-Tan, Medium-Beige, and Camel-Tan.
Is mounting hardware included?
Yes. The 1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit comes with the mounting hardware listed for it.
1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1999-2000 Mazda Miata, Driver & Passenger
- Kit listing — see overview for which seating positions / belt count are included
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit
- Confirm this listing matches your vehicle (1999-2000 Mazda Miata, Driver & Passenger), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1999-2000 Mazda Miata, Driver & Passenger Seat Belt Kit
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1999-2000 Mazda Miata, Driver & Passenger?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
