Product Description
1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench Seat Belt
- One front outboard bench seat
- Sold for one person, driver or passenger
- Bench seat applications
- FMVSS 209 and 302 rated
Ford's tenth-generation F-150 arrived for 1997 with a rounded, aerodynamic body. This replacement covers one outer place on the regular cab bench.
Vehicle Fit
Sized for a single outboard bench place, left or right, in a 1997-1999 Ford F-150 regular cab.
Choosing a Color
Fifty-two shades appear in the menu for this F-150 belt, though the source copy says 32.
Why Upgrade?
Twenty-plus years of commuting usually leaves the left-side strap in these trucks frayed and slow to reel in.
Maintenance
Wipe the regular cab strap with a soapy cloth and let it hang out to dry before it winds back.
About the Ford F-150
The 1997 F-150 introduced the 4.6 liter and 5.4 liter modular V8s along with a 4.2 liter V6, and it became one of the best-selling vehicles in America.
Pre-Install Checklist
Look over the B-pillar bolt and the floor anchor on the side being redone.
Good to Know
Seatbelt Planet's listing does not state whether hardware comes with it, so ask us if you need to know.
The tenth-generation regular cab was offered with Styleside and Flareside beds, and both share this cab layout.
A single belt is the right buy when the opposite side still latches and retracts as it should.
Lariat, XLT and XL trims all used a bench in many regular cabs, and the belt suits each of them.
Gray, medium graphite and prairie tan were common interior colors, and the menu has shades close to each.
Tug the new strap sharply after fitting; the reel should lock at once.
Many of these regular cabs are still daily work trucks, and the driver belt is the first part of the cab to show it.
Call 574-226-6676 with any questions about fit or color.
Sun through the steeply raked windshield fades front webbing faster than you might expect.
Compare the latch end of your old strap with the photo on the listing before ordering.
When a tenth-generation regular cab F-150 rolls into the shop with a driver strap that has gone fuzzy along both edges, this single outboard belt is usually the first thing an owner asks about, because it lets one worn side be renewed without touching the opposite position that still works fine.
The 1997 truck looked so different from the 1996 model that Ford sold the older F-250 heavy-duty and the new F-150 side by side for a short time, and the cabin of the newer design got a fresh dash, door panels and a bench that this outer restraint was built to match.
Before ordering, sit on the bench and pull the old strap all the way out slowly, watching for cuts, stiff spots, or a reel that hesitates, since those are the signs most owners describe when they decide one outer position needs to be renewed.
Owners who still haul mulch, tools, or a dog in the cab tend to see grime ground into the webbing near the latch plate, and a new strap in a darker shade such as black or charcoal helps hide that kind of daily dirt in a working pickup.
Seatbelt Planet sews each order once you pick a webbing shade, so the belt you receive is new from end to end rather than a pulled salvage part with unknown history from a scrapyard truck.
Frequently Asked Questions
Is this one belt?
Yes, for either the driver or passenger outboard bench seat.
Bench or bucket?
Bench.
Which cab?
The 1997-1999 F-150 regular cab.
How many colors?
The menu lists 52; the text mentions 32.
Is hardware included?
The listing does not say; call us.
Questions about fit?
Call 574-226-6676.
1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench Seat Belt
- Confirm this listing matches your vehicle (1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1997-1999 Ford F-150, Standard Cab, Driver or Passenger Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
