Product Description

2001-2010 GEM Car (4 Seater), Driver or Passenger Seat Belt

Seatbeltplanet.com's™ 2001-2010 GEM Car (4 Seater), Driver or Passenger Seat Belt. 3 Point Retractable Lap & Shoulder Seat Belt Kit with End Release Buckle

• Retractable 3 Point Lap & Shoulder Belt
• End Release Buckle
• Driver or Passenger Seating Position
• Hardware not included

If you drive a four-seat GEM, you probably use it for more than quick solo errands. These little electric cars carry families to the community pool, guests to their resort cottages, and crews across large campuses. With all that passenger traffic, the seat belts see a lot of use. The Seatbelt Planet 2001-2010 GEM Car (4 Seater) Driver or Passenger Seat Belt is a 3-point replacement for one seat.

Lap and Shoulder Protection

This listing describes a 3-point retractable lap and shoulder seat belt kit with an end release buckle, for the driver or passenger seating position, with hardware included. A 3-point belt restrains both the hips and upper body, which is the design used in most cars' outboard seats.

Note that Vintage Car Radio also carries a 2-point lap belt listed for 2000-2002 four-seat GEMs. Because the year ranges overlap, look at your current belts to see whether you need a lap belt or a lap-and-shoulder belt. Contact us any time if you need help.

Fast Facts

• Vehicle: 2001-2010 GEM Car, 4-seater
• Position: driver or passenger, one belt
• Type: 3-point retractable lap & shoulder
• Buckle: end release
• Hardware: included
• SKU: 52914
• Shipping: calculated at checkout

The Outdoor Factor

GEMs are often parked outside and driven with open sides. Belts in these conditions are exposed to:

• Sun that bleaches and weakens webbing
• Rain and humidity that cause mildew
• Sand and grit that wear retractors and buckles
• Salt air in coastal communities

A new belt restores clean looks and dependable operation, and it gives every rider a belt that works properly. Covering or garaging the car when possible will also help the new belts last longer.

For Resorts, Campuses, and Communities

If you manage a fleet of four-seat GEMs, replacing worn belts is a visible sign of care for guests and employees. Consistent belts across vehicles look professional, and fresh retractors make buckling quick for riders who are only going a short distance. Pick one webbing color for the whole fleet to keep things uniform.

Webbing Colors

You can choose from 52 webbing colors on the product page, with specialty options like M-Stripe, Red-Edge, Laguna Blue and Porcelain priced slightly higher, as the picker shows. Bright edges can add some fun to a colorful GEM, while black keeps a neutral look.

Installation

Remove the existing belt and note the mounting points. Clean and inspect them for corrosion. Install the new belt with the included hardware, keep the webbing untwisted, and tighten all bolts. Test the retractor and buckle before putting the car back into service. Pull the belt out sharply once to confirm it locks, then let it wind back in.

Shop With Vintage Car Radio

We sell and ship this belt. Need several for a fleet, or not sure which version fits your GEM? Contact our team and we will help you put together the right order.