Product Description
1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt
- One bench position
- Retractable three-point belt
- All-metal button-release latch
- Hardware included
- FMVSS 209 and 302 rated
Ford's compact Ranger arrived for 1983 and quickly became one of the best-selling small trucks in America. Seatbelt Planet's single bench belt for 1983-1986 standard cab Rangers reels in, closes with a metal button-release latch, and arrives with bolts and federal 209/302 certification.
Where It Fits
Listed for either outboard bench position of 1983-1986 Ford Ranger standard cab trucks.
Color Options
Choose from 52 webbing colors, 13 premium.
Why Replace Old Belts?
First-generation Rangers are often still working, and their driver's belts are usually the most worn part of the cab.
Care Tips
Clean with mild soap and keep tools off the webbing.
About the 1983-1986 Ford Ranger
The first Ranger replaced the Courier and was built by Ford itself, with a choice of four-cylinder engines and a V6.
Pre-Install Checklist
Check the Ranger's floor and B-pillar mounts and clear the threads.
Good to Know
One bench belt.
All-metal buckles have a solid feel.
Note your color for a matching second belt.
The first-generation Ranger was offered with a bench seat in many work-oriented trucks, and the outboard belts see the most wear. This single belt replaces one side.
Seatbelt Planet describes this belt as an all-metal style for 1983-86 Ranger bench seats.
Inspect the floor and pillar anchors for rust before fitting, especially in trucks used in snowy climates.
Released, the strap winds back toward the pillar.
Pick a shade near the surviving belt or buy both.
Ignore the older 32-color note on the maker's page; the current Ranger option offers 52.
Fresh belts make an older Ranger more pleasant to drive every day.
Early Rangers are gaining a following among fans of compact eighties trucks.
Keep the buckle free of dirt and grit.
First-generation Rangers were offered as short and long bed trucks, and both use the same standard cab front belts. Bed length does not matter here.
Production starts at checkout.
The Ranger's compact cab is narrow, and the bench seats two adults comfortably with a third for short trips. The outboard belts take daily wear, and a fresh one restores a clean look to the cab.
Bolts are supplied with it.
Your Ranger belt is sewn after a shade is picked. Compare the swatches with your bench seat in daylight, since Ranger interiors came in a range of colors. Choosing a shade close to the remaining belt keeps the cab looking consistent, or you can order the pair for a perfect match.
The first Ranger replaced the imported Courier, and Ford built it at its Louisville and Twin Cities plants. Many of these trucks spent their lives as farm or fleet vehicles, so their belts often show heavy wear.
Frequently Asked Questions
One belt?
Yes, driver or passenger.
Bench seat?
Yes.
Buckle?
All-metal push button.
Hardware?
Included.
Standards?
FMVSS 209 and 302.
Pair?
Listed separately.
Does it fit an extended cab?
Seatbelt Planet lists it for standard cab trucks with bench seats.
Does it retract?
Yes.
Questions about fit?
Call 574-226-6676.
1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Vehicle application from listing: 1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — 1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt
- Confirm this listing matches your vehicle (1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — 1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench Seat Belt
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit 1983-1986 Ford Ranger Standard Cab, Driver or Passenger, Bench?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
