Product Description

1995-1999 Subaru Legacy Wagon, Driver & Passenger Seat Belt Kit

Seatbeltplanet.com's™ 1995-1999 Subaru Legacy Wagon, Driver & Passenger Seat Belt Kit. 3 Point Retractable Lap & Shoulder Seat Belt Kit with End Release Buckle

• Retractable 3 Point Lap & Shoulder Belt
• End Release Buckle
• Driver & Passenger Seating Position
• Hardware included

Ask a Subaru fan about the 1990s and the Legacy wagon comes up fast. It hauled camping gear, dogs, skis, and kids, and it did it in every kind of weather. The Outback version made the formula famous, but the regular Legacy wagon has plenty of loyal owners too. If yours is a long-term keeper, the Seatbelt Planet 1995-1999 Subaru Legacy Wagon Driver & Passenger Seat Belt Kit puts new belts in both front seats.

The Kit

Per the product listing, you receive a 3-point retractable lap and shoulder seat belt kit with end release buckles for the driver and passenger positions. Hardware is included. This kit is listed for the wagon; the sedan has its own listing, so order the one that matches your body style.

Wagon Life Is Tough on Belts

A wagon tends to have a busier life than a sedan. Front belts in these cars commonly show:

• Dog damage. Chewed edges and claw-pulled threads are more common than you would think.
• Sun fading. Big glass areas let in lots of light, and the shoulder belt gets the most of it.
• Grit in the buckle. Beach sand, trail dirt, and road salt find their way in.
• Tired retractors. Hundreds of thousands of miles take their toll.

Swapping in new belts fixes all of these at once and makes the front of the car feel tight and fresh.

Colors to Choose From

The color picker lists 52 webbing colors; a handful of specialty shades, including M-Stripe and the edge-stripe styles, add a small upcharge that appears when you select them. Most owners going for a stock look pick black. Silver-Edge works well in cars with gray interiors.

Specifications

• Vehicle: 1995-1999 Subaru Legacy wagon
• Positions: driver & passenger
• Type: 3-point retractable lap & shoulder
• Buckle: end release
• Hardware: included
• SKU: 54711
• Shipping: calculated at checkout

Building a Complete Interior

Vintage Car Radio also carries the rear outboard kit and the rear center belt for the 1995-1999 Legacy wagon. If you are redoing the whole cabin, ordering all three lets you match colors across every seat. That kind of consistency stands out, especially in a well-kept example people will look at closely at a meet or when you sell.

Why Now?

Second-generation Legacys are getting harder to find in good condition. Owners who have one are increasingly deciding to keep it rather than replace it. When you plan to drive a car for years to come, investing in the parts that protect you makes sense. Seat belts are near the top of that list.

Installing the Kit

The front belts mount at the floor and B-pillar. Pop off the lower pillar trim to reach the retractor, note the routing, and remove the old belt. Inspect the anchor threads, then install the new belt with the included hardware and tighten securely. Run the belt in and out a few times before reinstalling trim.

Questions Welcome

Our team at Vintage Car Radio is happy to help with fitment or color questions. Your order ships directly from us.