Product Description

1995-1999 Subaru Legacy Sedan, Driver & Passenger Seat Belt Kit

Seatbeltplanet.com's™ 1995-1999 Subaru Legacy Sedan, Driver & Passenger Seat Belt Kit. 3 Point Retractable Lap & Shoulder Seat Belt Kit with End Release Buckle

• Retractable 3 Point Lap & Shoulder Belt
• End Release Buckle
• Driver & Passenger Seating Position
• Hardware included

The second-generation Subaru Legacy quietly built the brand's reputation in North America. Standard all-wheel drive, the flat-four engine, and solid build quality turned it into the car people kept forever. Many 1995-1999 sedans are still out there with huge mileage, and a growing number of enthusiasts are cleaning them up and keeping them on the road. The Seatbelt Planet 1995-1999 Subaru Legacy Sedan Driver & Passenger Seat Belt Kit replaces both front belts at once.

What You Get

The listing describes this as a 3-point retractable lap and shoulder seat belt kit with end release buckles for the driver and passenger seating positions, with hardware included. It is listed for the sedan body style. A separate kit is listed for the Legacy wagon.

Signs It Is Time

High-mileage Legacys often show belt wear such as:

• Retractors that need a tug to rewind fully
• Shoulder webbing that has gone gray or brittle from sun exposure
• Buckles that do not release smoothly
• Webbing worn thin where it rubs the seat bolster

These cars were commonly driven daily for 200,000 miles or more. That means many thousands of buckle cycles on the front belts. Even if they still latch, a tired belt is worth replacing.

Why Buy as a Pair

Replacing both front belts together means matching color and matching feel. The driver side usually wears first, but the passenger belt in a car of this age is often not far behind. Doing both in one job also saves time, since the trim you remove for one side is the same work as the other.

Webbing Colors

Webbing is offered in 52 colors, from black and the classic edge stripes to brights and earth tones, and specialty shades such as M-Stripe, the edge colors, Bone and White carry an upcharge shown in the color picker. Black is the factory-style look. Blue-Edge is a fun nod to Subaru's rally heritage if you want something a little different.

Specs

• Vehicle: 1995-1999 Subaru Legacy sedan
• Positions: driver and passenger
• Type: 3-point retractable lap & shoulder
• Buckle: end release
• Hardware: included
• SKU: 54710
• Shipping: calculated at checkout

For Daily Drivers and Keepers

You do not need a show car to justify new belts. If your Legacy is a daily driver, the front belts are among the most-used parts in the car. If it is a keeper you are restoring, new belts are one of the most visible upgrades you can make to the interior, right alongside fresh seat covers and a clean headliner.

Installation

Remove the lower B-pillar trim to reach the retractor and upper anchors. Note the original routing before removing anything. Check the threads at each anchor, install the new belts with the included hardware, and keep the webbing flat. Test each retractor and buckle before replacing the trim.

Order From Vintage Car Radio

Vintage Car Radio sells and ships this kit. If you would like help confirming fitment or choosing a color, our team is glad to answer questions.