Product Description
Seatbelt Planet protective flat sleeves slide over seat belt webbing to protect it where it rubs or wears. They are made of semi-rigid black material and come in five lengths.
Features
- Help protect seat belt webbing at high-exposure locations
- Semi-rigid material
- Black
- Available in 4, 6, 9, 12 and 15 inch lengths
Where to Use Them
Webbing wears fastest where it rubs against a seat edge, a door pillar or a buckle stalk. A sleeve at that point takes the wear instead of the belt.
Choosing a Length
Measure the section of webbing that needs protection and choose the next size up from the Size menu: 4, 6, 9, 12 or 15 inches.
Fitting
Slide the sleeve over the webbing before the belt is mounted, or over the free end, and position it where it is needed. Make sure it does not stop the belt from retracting.
A Finished Look
Black sleeves blend with most interiors and give a neat, factory-style finish to new or restored belts.
Order Enough
If you are doing several belts, order a sleeve for each position that needs one.
Keep a Spare
Sleeves are small and inexpensive, so many owners order an extra in case a second belt needs protection later.
Before You Order
Check your mounting points and the condition of the floor and pillar where the belt will attach. Rust or damaged metal should be repaired before any seat belt is installed.
Caring for Your Belts
Clean webbing with mild soap and water and let it air dry. Avoid bleach and harsh cleaners, which can weaken the fibers. Replace any belt that has been in a collision.
Why Replace Old Belts
Seat belt webbing ages. Sunlight, heat and years of use weaken the fibers even when a belt still looks fine. New belts restore the protection the car was meant to have.
Wearing Belts Correctly
The lap portion should sit low across the hips, not the stomach, and the shoulder portion should cross the chest and collarbone, away from the neck. A belt that is twisted or loose gives less protection.
End Release Buckles
An end release buckle is the style found in most modern cars: push the button on the end and the tongue releases. It is familiar to passengers and easy to use with gloves or in a hurry.
Retractable Convenience
A retractor keeps the webbing off the floor and out of door jambs when the belt is not in use, and it locks under sudden stops or hard braking.
Made in the USA
Seatbelt Planet builds its belts in the United States, using webbing and hardware that meet federal safety standards.
Getting Help
If you are not sure which belt or length you need, contact us with your vehicle, seat type and mounting points and we will help you choose.
Seatbelt Planet Protective Flat Sleeves FAQ
What color are they?
Black.
What lengths are offered?
4, 6, 9, 12 and 15 inches.
What are they made of?
Semi-rigid material.
What do they do?
Protect webbing at high-exposure locations.
Will they stop the belt retracting?
Position the sleeve so the belt moves freely.
Seatbelt Planet Protective Flat Sleeves - Black 1 specifications
- Seatbelt Planet aftermarket seat belt / restraint product (application per listing title)
- Tested and certified to meet FMVSS 209 and FMVSS 302 (certification tag on belts)
- Sold as aftermarket replacement — confirm buckle style, retractable vs fixed, and seat type before order
- Complete belts are preferred; mixing buckle/tongue brands is not recommended (components are designed to work together)
- 1-year manufacturer warranty for component issues from ship date (excludes abuse, accident damage, or disassembly)
- 90-day satisfaction guarantee per Seatbelt Planet (installed returns may incur restocking fee)
Installation Tips — Seatbelt Planet Protective Flat Sleeves - Black 1
- Confirm this listing matches your vehicle (the vehicle application shown in the title), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
Seatbelt Planet Protective Flat Sleeves - Black 1 manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — Seatbelt Planet Protective Flat Sleeves - Black 1
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit the vehicle application shown in the title?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
