Product Description

1995-1999 Subaru Legacy Wagon, Rear Driver & Passenger Seat Belt Kit

Seatbeltplanet.com's™ 1995-1999 Subaru Legacy Wagon, Rear Driver & Passenger Seat Belt Kit. 3 Point Retractable Lap & Shoulder Seat Belt Kit with End Release Buckle

• Retractable 3 Point Lap & Shoulder Belt
• End Release Buckle
• Rear Driver & Passenger Seating Position
• Hardware included

In a Legacy wagon, the rear outboard belts share space with everything else that rides in back. Shopping bags, sports gear, and dog crates all brush against them, and the retractors mounted near the cargo area get bumped and dusty. After twenty-plus years, those belts are usually overdue for replacement. The Seatbelt Planet 1995-1999 Subaru Legacy Wagon Rear Driver & Passenger Seat Belt Kit replaces both rear outboard belts in one order.

Included in the Kit

The listing describes a 3-point retractable lap and shoulder seat belt kit with end release buckles for the rear driver-side and passenger-side positions. Hardware is included.

Rear Belts: Out of Sight, Out of Mind

Most owners pay attention to the front belts because they use them every day. Rear belts are easy to overlook until a passenger complains that the belt will not pull out or will not rewind. Common rear-belt problems in older Legacy wagons include:

1. Retractors that have lost tension from years of light use
2. Webbing faded by sunlight through the rear side glass and tailgate window
3. Belts caught in the folding seatback hinges
4. Buckle stalks that are dirty or difficult to latch

If your passengers have to fight with the belt, it is time for new ones. A smooth, quick-latching belt is one of those small things everyone in the back seat appreciates.

Matching the Interior

There are 52 webbing colors to pick from, and the specialty group (M-Stripe, the edge colors, Miami Blue, Acid Green, Bone, White and a few others) carries an upcharge listed in the picker. Pair them with the same color for the front kit and rear center belt, and every seat in the wagon will match.

Kit Specs

• Fits: 1995-1999 Subaru Legacy wagon
• Positions: rear driver side & rear passenger side
• Type: 3-point retractable lap & shoulder
• Buckle: end release
• Hardware: included
• SKU: 54712
• Shipping: calculated at checkout

A Wagon for the Long Haul

Many owners of second-generation Legacy wagons plan to keep their cars for as long as possible. They are practical, durable, and fun to drive in bad weather. As the car ages, keeping the safety equipment in top shape is part of the deal. Replacing the rear belts is a straightforward way to protect the people you carry most often, whether that is your kids, friends, or a hiking group.

Installation Pointers

Access to the rear retractors usually requires removing some interior trim near the cargo area. Take photos as you go so you can reassemble everything correctly. Inspect each anchor, install the new belts with the included hardware, keep the webbing flat and untwisted, and tighten securely. Check that both belts pull out and retract smoothly before putting the trim back.

Get It From Vintage Car Radio

Vintage Car Radio ships this kit directly to you. Have a question about fitment or colors? Reach out to our team any time before you order.