Product Description
This RetroSound listing is for the RetroSound Chevrolet 6x9 3-Way Rear Deck Speakers. RetroSound builds modern classic-look radios and audio for vintage vehicles. Choose the options on this page that match the dash and features you want.
Features
- Authorized RetroSound product for classic car and truck installs
- Sized for classic vehicle openings as listed in the title
- Pair with a RetroSound or other classic radio for a full install
- Sold through authorized RetroSound dealers
Before You Install
Test-fit the radio or speakers before cutting or drilling. Confirm wiring, antenna, and speaker impedance. We sell the product and related accessories, but we do not offer installation.
About RetroSound
RetroSound focuses on classic-styled car audio. This page is specifically for RetroSound Chevrolet 6x9 3-Way Rear Deck Speakers. For help matching this listing, call 844-802-4499.
RetroSound Chevrolet 6x9 3-Way Rear Deck Speakers FAQ
Is this an authorized RetroSound product?
Yes. This listing is staged for RetroSound products sold through an authorized dealer.
Which motor should I choose?
Use the options on this page, or call 844-802-4499 for help.
Chevrolet 6×9 3-Way Rear Deck Speakers specifications
- Model R-693N (Retro Manufacturing)
- 6×9-inch 3-way stereo speakers (sold as a pair); Triax® 3-way response
- Nominal impedance: 4 Ω
- Frequency response: 40 Hz–21 kHz
- Sensitivity: 90 dB (SPL @ 1 W/1 m)
- Power handling: 100 W RMS / 200 W peak (TrueRating™)
- Mounting depth: 1.9″ (48.5 mm); install location: rear package tray
- Neodymium magnet; Santoprene® surrounds; silk tweeters; dip-cut magnet
- Includes speaker wire and speaker grills
- Speakers limited warranty: 1 year (Retro Manufacturing)
Chevrolet 6×9 3-Way Rear Deck Speakers — Wiring / install tips
Follow the sheet that ships with the product if it differs from this summary.
- Disconnect the battery before wiring.
- Intended for rear package-tray / rear-deck openings that accept 6×9 speakers.
- Confirm 4 Ω load and polarity; use included wire and grills.
- Mounting depth 1.9″ — check clearance under the deck.
Vintage Car Radio does not offer installation.
Chevrolet 6×9 3-Way Rear Deck Speakers manuals
When Retro Manufacturing publishes a PDF on the product page (speakers manual, amp manual, R-TW84 manual, etc.), use that document for the official diagram.
One-Year Retro Manufacturing Warranty
Per Retro Manufacturing’s limited warranty, Speakers and Accessories are covered for 1 year from the original purchase date for defects in materials and workmanship when purchased from Retro Manufacturing or an authorized dealer.
RA required — tech@retromanufacturing.com or 1-888-325-1555, or call Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
FAQ — Chevrolet 6×9 3-Way Rear Deck Speakers
Is this a radio head unit?
No — this is a RetroSound speaker, amplifier, or subwoofer accessory. Motor 2 vs Motor 4 comparisons apply only to RetroSound radios.
What impedance / power should I match?
Use the Specs figures from Retro Manufacturing on this page (do not exceed RMS ratings).
Do you install?
No.
Warranty?
1-year Retro Manufacturing coverage for speakers/accessories. See Warranty.
Need help?
844-802-4499 or 574-226-6676.
Specs
Wiring / Tech Tips
Manuals
Warranty
One-Year Retro Manufacturing Warranty
Per Retro Manufacturing’s limited warranty, Speakers and Accessories are covered for 1 year from the original purchase date for defects in materials and workmanship when purchased from Retro Manufacturing or an authorized dealer.
RA required — tech@retromanufacturing.com or 1-888-325-1555, or call Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
