Product Description
This listing is for the RetroSound Radio Remote Mounting Kit. Authorized RetroSound / RetroBelt dealer. Choose options that match your vehicle and features.
Features
- Authorized product for classic car and truck applications
- Sold through an authorized dealer
Vehicle Fit
This page targets Radio Remote Mounting Kit. Compare your year, make, model, and opening to the title before ordering. Call 844-802-4499 if you are unsure.
Before You Install
Test-fit before cutting or drilling. Confirm wiring, mounting, and clearances. Vintage Car Radio does not offer installation.
About This Product
For help with RetroSound Radio Remote Mounting Kit, call 844-802-4499 or 574-226-6676.
RetroSound RetroRadio specifications
Fitment target: listed years classic vehicle.
- DIN Solutions / 1.5 DIN style face as named in the title (cut or modified DIN opening unless the product says otherwise)
- Built-in Bluetooth® streaming and hands-free on current RetroSound motors (mic included where listed)
- AM/FM RDS tuner with presets; selectable regional tuner bands where supported
- 12 V negative-ground only; modular face + motor assembly required
- Use the Motor option when present; default storefront pricing follows Retro Manufacturing’s published Motor 2B tier when that option exists
RetroSound RetroRadio wiring and tech tips
Power and ground (Retro Manufacturing)
Connect all three or the radio will not work:
| Function | Wire |
|---|---|
| Constant +12V | Yellow |
| Ignition / ACC +12V | Red |
| Ground | Black |
Motor wiring diagrams (PDF). Do not cut harness/antenna/USB/AUX — voids warranty per Retro Manufacturing.
Install tips for listed years classic vehicle
- Disconnect the battery before wiring.
- Assemble face to motor; set InfiniMount™ shaft width/depth to the factory holes.
- Wire ground/constant/ignition, speakers, and antenna per the motor-box diagram.
- Secure with the supplied backstrap (required — prevents shaft damage / warranty issues).
- Install bezel/faceplate, reconnect battery, and test.
12 V negative-ground only. Vintage Car Radio does not install radios.
RetroSound RetroRadio manuals
Retro Manufacturing Warranty
Per Retro Manufacturing’s limited warranty, coverage depends on the electronics/motor supplied with this radio. See the warranty page and the sheet in the box for the term that applies to your unit.
RA required — tech@retromanufacturing.com or 1-888-325-1555, or Vintage Car Radio 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
FAQ — RetroSound RetroRadio
Will this fit my listed years classic vehicle?
Sold for the application in the title — compare photos to your dash before ordering.
Where are the official diagrams?
See the Manuals tab for Retro Manufacturing PDFs.
Do you install?
No.
Need help?
844-802-4499 or 574-226-6676.
Specs
Wiring / Tech Tips
Manuals
Warranty
Retro Manufacturing Radio Warranty
Warranty term depends on Motor selection for Radio Remote Mounting Kit (Motor 4HD commonly carries a longer published term than 1B/2B — see Retro Manufacturing warranty).
RA: tech@retromanufacturing.com / 1-888-325-1555, or Vintage Car Radio 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
