Product Description
This RetroSound listing is for the RetroSound 1967-1968 Mustang 5x7 Dual Voice Coil Dash Speaker. RetroSound builds modern classic-look radios and audio for vintage vehicles. Choose the options on this page that match the dash and features you want.
Features
- Authorized RetroSound product for classic car and truck installs
- Sized for classic vehicle openings as listed in the title
- Pair with a RetroSound or other classic radio for a full install
- Sold through authorized RetroSound dealers
Before You Install
Test-fit the radio or speakers before cutting or drilling. Confirm wiring, antenna, and speaker impedance. We sell the product and related accessories, but we do not offer installation.
About RetroSound
RetroSound focuses on classic-styled car audio. This page is specifically for RetroSound 1967-1968 Mustang 5x7 Dual Voice Coil Dash Speaker. For help matching this listing, call 844-802-4499.
RetroSound 1967-1968 Mustang 5x7 Dual Voice Coil Dash Speaker FAQ
Is this an authorized RetroSound product?
Yes. This listing is staged for RetroSound products sold through an authorized dealer.
Which motor should I choose?
Use the options on this page, or call 844-802-4499 for help.
1967-68 Mustang Factory-Air 5×7 DVC Dash Speaker specifications
- Model R-507N (Retro Manufacturing)
- 5×7-inch dual voice coil dash speaker for 1967–68 Ford Mustang with factory air
- Dual voice coils produce a stereo mix from a single speaker location
- Nominal impedance: 4+4 Ω
- Frequency response: 65 Hz–21 kHz; sensitivity: 87 dB
- Power handling: 40 W RMS / 80 W peak (TrueRating™)
- Mounting depth: 2.22″ (56.5 mm); install location: dash
- Neodymium magnet; Santoprene® surrounds; silk tweeters; dip-cut magnet
- Includes speaker wire, 8 Ω wiring kit, and Universal Speaker Bracket (RS-UB1KT)
- Speaker grill: no (per manufacturer specs table)
- Speakers limited warranty: 1 year (Retro Manufacturing)
1967-68 Mustang Factory-Air 5×7 DVC Dash Speaker — Wiring / install tips
Follow the sheet that ships with the product if it differs from this summary.
- Intended for the 1967–68 Mustang factory-air dash speaker location — compare your opening before ordering.
- Dual voice coil wiring: follow the included 8 Ω wiring kit / manufacturer instructions for left/right mix.
- Use the included universal bracket; mounting depth 2.22″.
- Disconnect the battery before wiring.
Vintage Car Radio does not offer installation.
1967-68 Mustang Factory-Air 5×7 DVC Dash Speaker manuals
When Retro Manufacturing publishes a PDF on the product page (speakers manual, amp manual, R-TW84 manual, etc.), use that document for the official diagram.
One-Year Retro Manufacturing Warranty
Per Retro Manufacturing’s limited warranty, Speakers and Accessories are covered for 1 year from the original purchase date for defects in materials and workmanship when purchased from Retro Manufacturing or an authorized dealer.
RA required — tech@retromanufacturing.com or 1-888-325-1555, or call Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
FAQ — 1967-68 Mustang Factory-Air 5×7 DVC Dash Speaker
Is this a radio head unit?
No — this is a RetroSound speaker, amplifier, or subwoofer accessory. Motor 2 vs Motor 4 comparisons apply only to RetroSound radios.
What impedance / power should I match?
Use the Specs figures from Retro Manufacturing on this page (do not exceed RMS ratings).
Do you install?
No.
Warranty?
1-year Retro Manufacturing coverage for speakers/accessories. See Warranty.
Need help?
844-802-4499 or 574-226-6676.
Specs
Wiring / Tech Tips
Manuals
Warranty
One-Year Retro Manufacturing Warranty
Per Retro Manufacturing’s limited warranty, Speakers and Accessories are covered for 1 year from the original purchase date for defects in materials and workmanship when purchased from Retro Manufacturing or an authorized dealer.
RA required — tech@retromanufacturing.com or 1-888-325-1555, or call Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not offer installation.
