Product Description
Getting a seat belt buckle to sit in the right place is not always easy in an older vehicle. Seats get swapped, consoles get added and factory anchor points may be too far back or too low. The Seatbelt Planet 6" Angle Bracket is a simple steel extension that moves the anchor point to where it works best.
What It Is
Seatbelt Planet describes this part as a 6-inch L bracket, available in an (A) left or (B) right configuration, with a 65 degree angle. It is designed for extending buckle length, and whether you need the left or right version depends on your mounting point.
Specifications
- 6-inch angled floor extension bracket
- (A) left or (B) right configuration
- 65 degree angle
- Great for extending buckle length
- Steel construction
When You Need One
An angle bracket is useful when:
- The buckle sits too low or too far back between the seats to reach comfortably
- Aftermarket bucket seats or a console have changed where the buckle needs to be
- The factory anchor point is in a spot where a straight bracket would bend the belt at an awkward angle
Choosing Left or Right
Hold the bracket in place at the anchor point and check which way it needs to lean to bring the buckle up and toward the occupant. The two versions are mirror images, so a car often uses one of each, one for the driver's buckle and one for the passenger's. The Quantity menu on this listing lets you order up to four. Contact us before ordering if you are not sure which you need.
Installation Tips
Use the correct grade of bolt for the anchor and a backing plate where the floor is thin. Tighten securely and check that the bracket cannot rotate into the seat track or interfere with seat movement. Seatbelt Planet sells hardware kits that pair with its brackets. After installation, buckle up and sit in the seat to make sure the buckle is easy to reach and the belt lies flat across the hips.
Part of a Proper Installation
A seat belt is only as strong as its anchors. Brackets like this one help you place the belt correctly without improvising with flat stock or washers. If you are adding belts where none were installed before, consider having a qualified shop handle the anchor points.
Inspect Regularly
Check the bracket and its bolts whenever you service your belts or work under the seats. Look for cracks, rust or loose hardware, and replace anything that looks worn. A few minutes of inspection keeps the belt doing its job.
Seatbelt Planet 6-Inch Angle Bracket FAQ
What does this bracket do?
It extends and angles a buckle anchor point, which is great for extending buckle length.
What is the angle?
65 degrees.
Is it left or right?
It comes in an (A) left or (B) right configuration, depending on your mounting point.
How many can I order?
The Quantity menu offers one to four.
Does it include bolts?
Hardware is sold separately. Ask us about the right kit.
Seatbelt Planet 6" Angle Bracket 1 specifications
- Seatbelt Planet mounting bracket / hardware accessory as titled
- Used with compatible Seatbelt Planet belts — confirm bolt size and bend style from the product page
- Follow any hardware notes packed with the part
Installation Tips — Seatbelt Planet 6" Angle Bracket 1
- Confirm this listing matches your vehicle (the vehicle application shown in the title), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
Seatbelt Planet 6" Angle Bracket 1 manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — Seatbelt Planet 6" Angle Bracket 1
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit the vehicle application shown in the title?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
