Product Description
When a seat belt buckle sits too low or too far back, the belt becomes awkward to use and may not sit properly across the hips. Often the fix is an extension bracket that raises the buckle and changes its angle at the same time. The Seatbelt Planet 6" Angle Bracket is designed to do exactly that.
Specifications
Seatbelt Planet describes this part as a 6" angled floor extension bracket, offered in a left (A) or right (B) configuration with a 65-degree angle. Its listed features are:
- Length: 6 inches
- Angle: 65 degrees
- Configuration: left (A) or right (B), depending on the mounting point
- Great for extending buckle length
- Brand: Seatbelt Planet
Left or Right?
Because the bracket is angled, it has a left and a right orientation. Which one you need depends on which side of the seat it mounts on and which way the belt needs to point. If you are unsure which configuration suits your installation, contact us with a description or photo of the mounting point before ordering, and we will help you work it out.
Why Use an Angled Bracket
A buckle mounted directly to the floor often sits buried between the seat cushion and the console or door. An angled extension lifts it up and tilts it toward the occupant, which makes it easier to find and fasten. It is especially useful in:
- Classic cars fitted with thicker modern seats or new foam
- Bucket seat conversions where the original anchor points no longer line up
- Custom builds and resto-mods with relocated seats
- Cars where the factory buckle is hard to reach
Ordering
Each bracket extends one anchor point. If you are doing both front seats, you will typically need one for each buckle. Use the quantity menu to order up to four.
Hardware and Mounting
Use proper seat belt bolts of the correct grade and thread, along with lock washers or locking nuts. Where the floor metal is thin, back the bolt with a reinforcement plate. Seatbelt Planet offers several hardware kits that pair with its brackets, and we carry many of them. Always mount the bracket to solid, rust-free metal.
Fitting Tips
Mock up the bracket and buckle before tightening anything. Sit in the seat and fasten the belt. The lap belt should lie low across the hips, and the buckle should be easy to reach without twisting the webbing. Move the seat through its full range of travel to make sure the bracket does not hit the seat track or frame. Check underneath before drilling any new holes so you do not damage fuel lines, brake lines or wiring. Tighten all bolts securely and recheck them after a short drive. If you are not confident about the strength of the mounting location, ask a qualified shop to inspect it.
A Simple Upgrade
A buckle that sits in the right place makes a car more pleasant to drive every day and encourages everyone to buckle up. For a small part, an angled extension bracket can make a big difference to comfort and safety.
6" Angle Bracket FAQ
What is this bracket for?
It extends a seat belt buckle and changes its angle, which is useful when a buckle sits too low or is hard to reach.
What angle and length is it?
It is a 6-inch bracket with a 65-degree angle.
Do I need a left or right bracket?
It comes in a left (A) or right (B) configuration depending on the mounting point. Contact us before ordering if you are not sure which you need.
Does it include bolts?
No hardware is listed with the bracket. Use proper seat belt bolts and a reinforcement plate where needed.
Can I order more than one?
Yes. The quantity menu lets you order 1, 2, 3 or 4 brackets.
Seatbelt Planet 6" Angle Bracket specifications
- Seatbelt Planet mounting bracket / hardware accessory as titled
- Used with compatible Seatbelt Planet belts — confirm bolt size and bend style from the product page
- Follow any hardware notes packed with the part
Installation Tips — Seatbelt Planet 6" Angle Bracket
- Confirm this listing matches your vehicle (the vehicle application shown in the title), seat type (bench vs bucket), and buckle/retractor style before installing.
- Inspect mounting points for solid metal structure. Seatbelt Planet products are aftermarket — fabrication or adapters may be required on some vehicles.
- Use appropriate grade hardware. Some listings sell mounting hardware separately.
- Install a complete belt assembly when possible; do not mix unmatched buckle and tongue brands.
- After install, verify full extension, retraction (if applicable), and latching before driving.
- If unsure, use a professional installer. Improper installation can cause serious injury.
Selection help: Seatbelt Planet FAQ / guides at seatbeltplanet.com/faq.html · phone 405-736-0088.
Vintage Car Radio does not offer installation.
Seatbelt Planet 6" Angle Bracket manuals
- Seatbelt Planet FAQ (FMVSS, warranty, returns)
- Seatbelt Planet common questions / selection help
- Use any instruction sheet packed with your order for model-specific steps
Manufacturer: Seatbelt Planet · 405-736-0088
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
FAQ — Seatbelt Planet 6" Angle Bracket
Are these FMVSS / DOT approved?
Seatbelt Planet states belts are tested and certified to FMVSS 209 and 302; the certification tag is on the belt.
Can I replace only one side?
Seatbelt Planet recommends installing a complete belt — buckle and tongue are designed to work together.
Will this fit the vehicle application shown in the title?
Match the years, make/model, and seat position in the title. Call Seatbelt Planet at 405-736-0088 if you need a custom belt.
Do you install?
No.
Need help?
844-802-4499 / 574-226-6676, or Seatbelt Planet 405-736-0088.
Specs
Installation Tips
Manuals
Warranty
One-Year Seatbelt Planet Warranty
Per Seatbelt Planet, seat belts are covered under a one-year manufacturer warranty for component issues from the date shipped. Warranty returns are not accepted if there has been obvious abuse, the belt was involved in an accident, or the belt has been disassembled / components removed.
Seatbelt Planet also states a 90-day satisfaction guarantee; installed returns may be subject to a restocking fee. RMA required — contact Seatbelt Planet or Vintage Car Radio at 844-802-4499 / 574-226-6676.
Vintage Car Radio does not install seat belts.
