Presenting the HPC-1 High Power Voltage Converter by Aurora Design, available now from Vintage Car Radio.
Have you ever felt let down by your radio converter? Have you ever felt like throwing it through a window? Well, you're not alone. Anemic output has always been a problem when it comes to converted radios. It's an endless source of frustration that you're probably all-too-familiar with.
With the HPC-1 you can finally get a good quality performance in your 6V vehicle. It gives you the freedom to have two 4ohm speakers pumping while you drive fully, and you can even push it to a whopping four speakers if you don't plan on going full power. It's designed to give maximum output with as little compromise as possible, and at the best quality possible. With your engine at fast idle, the HPC-1 boasts up to 56W from a 6V positive ground system, and it can go up to 90W from a 6V negative ground system.
It delivers a clean output and it comes fully filtered on every connection. EMI reduction circuitry ensures you never have to put up with poor quality. You won't need to waste time tinkering with external filters. This converter does exactly what it says on the tin.
And you won't believe this when you see it, but this converter is tiny! Full reverse battery, transient protection, and a low voltage lockout circuit have all been combined into one neat tidy design. You won't have to worry about blown fuses anymore, and the chore of replacing broken and damaged converters will be a thing of the past! It's so small that you can easily mount it in your converted radio. Installation has never been simpler.
So why wait for your old converter to break down? Buy the HPC-1 today, wave goodbye to clunky old converters and say hello to efficiency, quality, and power.
Like all Aurora Design products, this product adheres to the SAE specifications. It is built in the USA at an ISO9001:2000 facility.
The HPC-1 offers a new level of performance in 6V vehicles. Until now, owners of vehicles with original 6/12V positive ground and 6V negative ground systems were extremely limited with their converted radios due to the anemic output of available power converters. With the HPC-1, owners can now fully drive two 4 ohm speakers, or four speakers at reduced power. The HPC-1’s highly efficient synchronous design ensures low power dissipation while providing maximum output to the radio. The HPC-1 can provide up to 56W output power from a 6V positive ground system and 90W output power from a 6V negative ground system with the engine at fast idle. Fully filtered on all connections, and through the use of proprietary EMI reduction circuitry, the HPC-1 provides an extremely clean output without the need for large, power robbing external filters. The HPC-1 features full reverse battery and transient protection. A low voltage lockout circuit ensures the converter always operates properly.
No more blown fuses or damaged converters due to a weak battery! Due to the clever design of the HPC-1, only a single board is required for all installations reducing inventory. Its extremely small size and low EMI output allow it to be mounted directly inside the converted radio simplifying installation and operation. As with all Aurora Design products, the HPC-1 is designed to SAE specifications and built in the USA at an ISO9001:2000 facility.